Akva-Stabil Effect-Line Montageanleitung Handbuch - Seite 7

Blättern Sie online oder laden Sie pdf Montageanleitung Handbuch für Inneneinrichtung Akva-Stabil Effect-Line herunter. Akva-Stabil Effect-Line 12 Seiten. Aquarium racks

Seite drucken

1-2mm.

gap

screws

the base

must be

ﬂush

with the

rear edge

of the

rail

Make sure the bases are

correctly adjusted.

Position the shelving unit.

Make sure there is approx.

10 cm between the unit and

the wall. Carefully adjust

all setting screws using a

spirit level.

Unpack the ﬁlters.

The rubber gasket must be

on the outside.

Lay all bottom shelves in

position.

Adjust both along and

across.

NB. Make sure there is al-

ways a minimum gap of 25

mm below the bottom rail

Mount the bushing through

the hole in the ﬁlter.

Fit the ﬁlters. The bushing

must face backwards.

Fit the T-piece to the ac-

companying outlet pipe.

Connect the pipes at the

rear

Use the plug for the ﬁnal

ﬁlter.

Fit the T-piece to the bush-

ing behind the ﬁlter.

Mount all T-pieces and

pipes.

Connect all ﬂoat valves

with the blue hose.