DoorKing 1601-235 Installationshandbuch - Seite 6
Blättern Sie online oder laden Sie pdf Installationshandbuch für Automatische Schranken DoorKing 1601-235 herunter. DoorKing 1601-235 7 Seiten. Octagon arm reverse/led edge installation
Seite druckenREVERSE EDGE / RED GREEN LED INSTALLATION
This kit is designed to install on a 14 ft aluminum octagon arm for a 1601 barrier gate operator or
a 1603 auto spikes operator. It CANNOT be used with a 1602 operator.
Note: DO NOT operate arm with a malfunctioning reverse edge.
Installation
2
Slide on Spacer
Tip: Liquid soap will help
spacer slide on easier.
3
Slide on Edge
Tip: Liquid soap will help
reverse edge slide on easier.
Reinstall End Cap
3
Push a screwdriver through the hole in cap to release
spring while pushing cap on. Keep pushing cap on
until a "CLICK" is heard which locks it in place.
1601-268-E-6-20
Remove End Cap
1
Push a screwdriver through hole
in bottom of end cap to release
spring while pulling cap off.
Note: Spacer
MUST be in
position.
6
DoorKing Part Numbers
8080-080
Reverse Edge
8080-096
Reverse Edge + Red/Green LED
Octagon Arm
Spacer
Reverse/LED Edge
Cover
Spacer
Reverse/LED Edge
120 S. Glasgow Avenue
Inglewood, California 90301
U.S.A.