Astralpool QB800 Benutzerhandbuch - Seite 13
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Schwimmbad-Staubsauger Astralpool QB800 herunter. Astralpool QB800 16 Seiten. Robotic pool cleaner
Auch für Astralpool QB800: Benutzerhandbuch (16 seiten)
QB800 robotic cleaner
Figure 23. Worn Brush Indicator
To maintain cleaner performance at its best you need
to replace the brushes as soon as one of the wear
indicators is reached (even if the blade wear is not
even). It is recommended that you replace the brushes
when the rubber is worn down to the top of the wear
indicator (or every two years, whichever comes first).
To replace a worn brush:
1.
Lift the cleaner to a vertical position so that the handle
is up.
Figure 24. Cleaner in Upright Position
2.
Separate the edges of the brush and undo the tabs.
Remove the worn brushes.
Figure 25. Undo the Tabs of the Brush
3.
To install the new brush, position the new brush on
the roller with the cleaning blades facing away from
the roller.
Owner's Manual
raised groove becomes
partially flattened,
indicating excessive
wear
2
3
Figure 26. Install the New Brush
4.
Thread each tab into the slot provided and gently feed
it through until the heel comes out at the other side of
the slot.
4
Figure 27. Pull Tabs Through Each Slot
5.
Use a pair of scissors to cut the tabs 3/4 inch from
the heel so that they are no higher than the cleaning
blade.
6.
Repeat the procedure to install the second brush.
Figure 28. Cut Tabs
13