Canon Auto Zoom 814 Anleitung Handbuch - Seite 24

Blättern Sie online oder laden Sie pdf Anleitung Handbuch für Camcorder Canon Auto Zoom 814 herunter. Canon Auto Zoom 814 36 Seiten. 8mm movie camera
Auch für Canon Auto Zoom 814: Anleitung Handbuch (40 seiten)

Seite drucken

Variable Use of the Shutter

• Running Lock

The running lock is for continuous

shooting.

Set the switch dial at

R L"

and pull the

trigger.

The shutter is locked at the running position and the

film keeps running even if you remove your hand from the

trigger.

When

releasing the lock, return the switch dial to

"R".

• Remote Control

Remote control EE shooting is possible with the joint use of the Remote

Switch 60 or the optional Remote Switch 3, and it is convenient when you

set the camera far from you. The Remote Switch 60 has a 60cm cord (2 ftl

for general shooting or to avoid blur in single frame shooting. The cord of

the Remote Switch 3 is 8 meters (26 ftl long

Set the switch dial of the camera at "OFF

and connect the plug of

the remote switch to the remote control socket on the

camera.

Then set the switch dial at "RL" and pull the trigger the same as with

the running lock. You can set the switch dial while pulling the trigger.

When you push down the switch button of the remote switch, film

starts running, and when you slide it in the direction of the arrow

while pressing it, it will be set the same as a running lock.

If you use a remote switch when shooting with manual aperture

control read out the proper f/stop number in the viewfinder and set

the aperture by pulling out the EE/manual aperture control ring and then

rotating

it.

When you remove the remote switch from the camera, be sure to turn

the switch dial of the camera to "R" or "OFF" beforehand, otherwise

the camera will start shooting and you will waste the film.

• When the remote switch is not being used, be sure to set the switch dial

at "OF F" to prevent the batteries from being spent. Be sure to be properly

prepared and ready for the actual operation.

• Check the conditions of the subject carefully before you operate the

camera from a

distance.

• If your eye is not against the eyepiece, be sure to attach the eyepiece

cover.