Cognex DataMan 100 Kurzreferenz-Handbuch - Seite 12
Blättern Sie online oder laden Sie pdf Kurzreferenz-Handbuch für Barcode-Leser Cognex DataMan 100 herunter. Cognex DataMan 100 18 Seiten. Shd/c-mount kit removal instructions
Auch für Cognex DataMan 100: Anweisungen zum Entfernen (2 seiten), Kurzreferenz (16 seiten)
Seite drucken
- 1. Getting Started
- 2. Setting up Your Dataman
- 3. Reference Information
- 4. Troubleshooting
- 5. Universal Mounting Bracket
- 6. Usb Connections
- 7. Output Wiring Example
- 8. Input Wiring Example
- 9. Training and Trigger Modes
- 10. Results Display
- 11. System Settings
- 12. Digital Output Wiring
- 13. Digital Input Wiring
- 14. Warnings and Notices
DataMan 100 Training
For best performance, you can train DataMan. Train DataMan by placing a code
in front of the reader and doing one of the following:
3
In the Display pane of the Setup Tool you
can click the Train Code button to train the
code, and you can click the Optimize Lighting
button to optimize lighting.
0
Press and hold the trigger
1
button for at least 3 seconds.
This trains the code and
optimizes lighting.
2
Click and hold the trigger
button in the Setup for at least
3 seconds. This trains the code
and optimizes lighting.
Training and Trigger Modes
Training is supported for the trigger modes shown below:
Trigger Mode
Training Supported?
Single
Presentation
Manual
DataMan 100 Training Feedback
DataMan reports the status of the tuning operation using its signalling
LEDs:
Flashes red
between 1 and
3 times when
training attempt
is complete.
Greater numbers
of flashes
indicate better
training results.
Yes
No
No
Displays steady
green if trained,
steady yellow if
untrained.