Doosan A0509s Kurzanleitung - Seite 7

Blättern Sie online oder laden Sie pdf Kurzanleitung für Robotik Doosan A0509s herunter. Doosan A0509s 9 Seiten.

Booting

If you use standard items, you should install DART-Platform SW for robot control. Please install

DART-Platform in advance. The installer download can be found in Robot LAB > Resources >

(https://robotlab.doosanrobotics.com/en/MyRobot/Dashboard

Software

need to log in the Robot LAB.

※

When the installation of DART-Platform is completed, proceed in the order shown below;

1. Turn on the power switch at the bottom of the control box.

2. Open the door of the control box and press and hold the power button located at the

bottom right of the safety board

3. Connect your desktop or Laptop to the control box.

4. After about 1 minute after booting starts, run the DART-Platform and check the serial

number of the robot connected to the network.

5. Select and connect the robot you want to connect to

ON/OFF switch

(Refer to the image below)

On/Off Switch

). To download the installer, you

LAN Port