AMES MRS 110B-1 Handbuch - Seite 9

Blättern Sie online oder laden Sie pdf Handbuch für Messgeräte AMES MRS 110B-1 herunter. AMES MRS 110B-1 12 Seiten. Radiological monitor

Radiological monitor MRS 110B-1

Manual

2.3 SWITCHING BETWEEN MEASURING UNITS (cpm / µSv/h)

To switch between units, press SET, than use up or down arrows to select the

desired unit and confirm the selection with pressing SET again.

MRS 110B-1 gives the exact values of dose rate, measured in µSv/h, only for the

photon energy that was used as the calibration source. For all other photon

energies, the measuring error due to the energy nonlinearity of the GM tube must

be taken into the consideration.

To set the alarm level, press "SET" twice. After this, current alarm level is

displayed, which can be modified by pressing "up" or "down" arrows. Selection

of alarm value is confirmed by pressing "SET" again.

As the default alarm value, we recommend to set few times the background

value (e.g. 0,4 µSv/h).

If we do not confirm new value of alarm, MRS 110 B-1 after few seconds

automatically returns to the measuring mode.

Serial number is displayed by pressing "up" arrow when in measuring mode.

MRS 110B-1 is switched off by pressing OFF key.

AMES d.o.o. Jamova 39, Ljubljana, Slovenia