Flycam FLCM-PLA-EA Montageanleitung - Seite 2

Blättern Sie online oder laden Sie pdf Montageanleitung für Kamera-Zubehör Flycam FLCM-PLA-EA herunter. Flycam FLCM-PLA-EA 4 Seiten. Flowline placid extension arm

Seite drucken

Flowline Placid Extension Arm Setup



With the help of an Allen key, remove the

bottom screw of the

spring

arm

(Not

Included), as shown in the

image.



Remove the bearing pulley from the Flowline

Placid Two Axis Spring Arm.



Now remove the top screw with the help of

the Allen key.



Properly insert the bush into the flowline

placid two axis spring arm, as shown in the

image.

Assembling of Flowline Placid Extension Arm



Insert the Flowline Placid Extension Arm

Properly in the Flowline Placid Two Axis

Spring Arm, as shown in the image.



After properly matching the threads of the

Placid arm, insert the 5/25" screw and

properly tighten it with the 4mm Allen key.

NOTE: The Placid Arm has been built using high

-grade Aluminum Alloy & the Springs used in

the Placid are made up of Stainless Steel.

flowline placid two axis