Flycatcher Smart Pixelator Benutzerhandbuch - Seite 2

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Spielzeug Flycatcher Smart Pixelator herunter. Flycatcher Smart Pixelator 2 Seiten. Age 3+
Auch für Flycatcher Smart Pixelator: Handbuch (2 seiten)

Seite drucken

Flycatcher Smart Pixelator Benutzerhandbuch

QUICK START

1. Download the smART Pixelator app on your mobile device or tablet.

2. Turn on your Bluetooth and connect to the smART Pixelator by clicking on the "connect" button

at the top right of your screen.

3. Pick a design:

- Choose from 50 projects on the pre-loaded activity card.

The six projects shown on the box can be completed with the 1300 Pixel Beads in this package.

- Customize your project by changing colors.

- Engineer your own project using the FREE app and any photo from a smart device.

EASY FINISH

1. When you've completed your bead design, gently remove the tray from the smART Pixelator ™ .

Place on an ironing board or on a towel on a heat-safe ﬂat surface.

Cover entire design with ironing paper.

2. Using a preheated dry iron set on medium, iron design in a circular motion, beginning with the edges.

Keep moving the iron until the beads show through the paper, about 10 to 30 seconds.

3. Let design cool about 15 seconds, then ﬂip tray over on a ﬂat, heat-safe surface and tap to remove

beads. Peel off paper and re-use to cover reverse side of your design.

Repeat ironing process on second side (not mandatory). Let design cool completely and remove paper.

SAFETY INFORMATION

BATTERY SAFETY INFORMATION

In exceptional circumstances batteries may leak ﬂuids that

can cause a chemical burn injury or ruin your product.

To avoid battery leakage:

Non-rechargeable batteries are not to be recharged.

Rechargeable batteries are to be removed from the toy

before being charghed.

Rechargeable batteries are only to be charged under

adult supervision.

Do not mix alkaline, standard (carbon-zinc), or

rechargeable (nickel-cadmium) batteries.

Do not mix old and new batteries.

Only batteries of the same or equivalent types as

recommended are to be used.

Batteries are to be inserted with correct polarity.

Exhausted batteries are to be removed from the product.

The supply terminals are not to be short circuited.

Dispose of battery(ies) safely.

Do not dispose of this product in a ﬁre.

The batteries inside may explode or leak.

AC ADAPTER:

Transformers / charger used with the toy are to be

regularly examined for damage to the cord, plug,

enclosure and other parts, and that, in the event of

such damage, the toy must not be used with this

transformer/charger until the damage has been

repaired.

The toy is not intended for children under 3 years old;

The toy shall only be used with a transformer for toys

The model number XY06J-0601000Q-EW (EU only)/

XY06J-0601000Q-BW (UK only)/

XY06S-0601000Q-UW/XY06S-0591000Q-UW/

XY-0601000-A (Aus-NZ only) or speciﬁcation of Input

Voltage: AC 100-240V 50-60 Hz, Output Voltage: DC

5.9V, 1A, transformer for use with the toy

The transformer is not a toy;

Toys liable to be cleaned with liquid are to be

disconnected from the transformer

before cleaning.

*The toy should be periodically examined for potential hazardous parts to be repaired or replaced.

BATTERY INSTALLATION

To insert or change the batteries,

twist the screw counter-clockwise to

loosen. Remove old batteries and in

sert 4 C batteries with the correct

polarity. Replace the screw and twist

clockwise to close.

2 TRAYS -

EACH TRAY

HOLDS

2 C BATTERIES

RADIO STATEMENT

Warning: Changes or modiﬁcations to this

unit not expressly approved by the party

responsible for compliance could void the

user's authority to operate the equipment.

This device complies with Part 15 of the FCC

Rules. Operation is subject to the following

two conditions: (1) this device may not

cause harmful interference, and (2) this

device must accept any interference

received, including interference that may

cause undesired operation.

This device contains licence-exempt

transmitter(s)/receiver(s) that comply with

Innovation, Science and Economic

Development Canada's licence-exempt RSS(s).

Operation is subject to the following two

conditions: (1) This device may not cause

interference. (2) This device must accept any

interference, including interference that may

cause undesired operation of the device

C SIZE BATTERY

Note:

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio

communications. However, there is no guarantee that

interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference

by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician

for help.

Manufactured by:

Flycatcher Inc.

59 East 54th street

New York, NY 10022

support@ﬂycatcherapps.com

C SIZE BATTERY

smART pixelator™ is a trademark

of Flycatcher Inc.

Visit us at:

www.smARTpixelator.com

For more detailed instructions,

questions or problems, please visit