Dopo BT-200 Benutzerhandbuch - Seite 6

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Redner Dopo BT-200 herunter. Dopo BT-200 16 Seiten. Wireless

Operation

There are two different modes.

1. CH01: Bluetooth mode (Default )

2. CH02: Auxiliary

Vol+

Bluetooth:

To connect while in Bluetooth mode.

Press " M " button to change channel.

Power on. (Default CH01Bluetooth)

The other Bluetooth compatible device will find "BT-200".

Sync and pair the two devices.

Once connection is established, begin to play music, make,

answer, or end a phone call.

Mode

Press "Volume up/down" button (see page4) to adjust sound.

Vol-

Discover or Pairing:

If device is connected, an alternating, blue and red, light will

Channel

flash.

Standby:

While device is searching, an alternating, blue and red, light

will flash.

Active:

Once Bluetooth device is connected successfully, a blue light

will flash slowly.

Note:

To connect to a device: notebook, mobile phone, tablet etc.

follow the instructions for the device.

Once the speaker is connected, set sound to

If the device cannot connect to the speaker, simply reboot the

speaker.

BT-200

Note:

If asked for a PIN, enter "0000".

"Output"