Dora Metal DM-92121 Benutzerhandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Kühlschrank Dora Metal DM-92121 herunter. Dora Metal DM-92121 18 Seiten.

EN - DORA METAL

The device should be located away from heat sources, in a place not exposed to sunlight. The

devices are not designed for the operation outside the buildings and they cannot be exposed

to the direct effects of adverse weather conditions (snow, rain, sunlight).

In accordance with the EN378 standard it should be ensured that the room where the device

with R290 medium is to be located has the proper volume. 1 m

refrigerant. The amount of R290 refrigerating medium is specified on the rating place of the

device.

CONNECTION TO ELECTRIC SYSTEM

The construction of the device is made according to the appropriate directives and harmonised

standards:

- low voltage directive 2006/95/EC,

- electromagnetic compatibility directive 2004/108/EC,

- PN-EN 60335-2-89:2012, PN-EN 60335-1:2012 standards,

- PN-EN 55014-1:2012, PN-EN-55014-2:1999 standards,

- PN-EN 61000-3-2:2007, PN-EN 61000-3-3:2009 standards.

The device is adapted to be supplied from the 230V 50Hz line and should be supplied from a separate

low voltage circuit. A grounded plug-in socket must be equipped with anti-shock protection selected,

according to the requirements of local standards and regulations, in compliance with the parameters

specified on the rating plate. The parameters of a residual current device should be selected according to the

current value, specified on the rating plate. The devices are provided with a flexible power supply cable of

HO5VV-F type (3x1,5mm², including protective conductor). The damaged power supply cable should be

replaced by a specialist from technical service or by a skilled person with appropriate qualifications.

The devices are equipped with a terminal to connect external equipotential bonding, marked by a

symbol

. Before connecting the device the installation correctness and effectiveness of equipotential

bonding operation should be checked in accordance with PN-IEC-60364-4-41.

The device can be started when effectiveness of anti-shock protection is confirmed by

results of measurements carried out according to the regulations in force.

The device can be connected to the electric system when it is stated that the electric system fulfils the

afore-mentioned requirements. The device is connected by inserting a plug of connecting cable into the plug-

in socket. A device, prepared in such a way, is ready to operate.

Because during transport the device could be inclined by more than 30



wait about 3

the condensing unit can be damaged.

Upright refrigerators and freezers

4 hours before connecting the device to the power supply system. Otherwise,

is required for 8 g of R290



from the vertical,