Cogvis fearless Installationshandbuch - Seite 9

Blättern Sie online oder laden Sie pdf Installationshandbuch für Zubehör Cogvis fearless herunter. Cogvis fearless 12 Seiten.

5. Software setup

After you have mounted and aligned your fearless device at the appropriate

position, you can start with the software setup. Make sure to configure no more

than 1 device at the same time, the housing is already mounted on the wall and

the sensor is roughly aligned. Please have the serial number of your device (to be

found on the underside of the packaging) ready for further steps. If problems occur

during setup, please press the button on the upper side of the white housing for

approx. 8 seconds (see illustration) and then restart the setup procedure.

Setup problems: Press the button for 8 seconds.

Start the device by connecting the power cable and the power supply to the power

outlet.

Now activate the WiFi of your smartphone or laptop and connect to the

corresponding WiFi network: fearlessAP-XXXXXXXX. (it can take up to 2 minutes

to display the corresponding network) The last 6 characters are different from

device to device. The password is fearless.

Newer versions of Android devices require explicit confirmation that you want to

connect to a WiFi without an Internet connection. Please confirm this query to

keep the network.

fearless

Installation guide

Page 9 of 12