Akw 02130/P Installations- und Pflegeanleitung - Seite 2

Blättern Sie online oder laden Sie pdf Installations- und Pflegeanleitung für Wheelchair Akw 02130/P herunter. Akw 02130/P 2 Seiten. Fold down seat

Seite drucken
02130/P - 02230/P Series Seat Dimensions
02130/P - 02230/P Series Seat Dimensions
Installation Instructions
Seat Dimensions (Cushion not shown)
Seat
460mm (18
1
/
")
8
383.5mm
(15")
475mm
6
(18
/
")
8
587mm
(23
1
/
")
8
Mounting Hole Dimensions
7
100mm (3
/
")
8
422mm
(16
40mm
(1
212mm
3
(8
424mm
3
(16
/
")
4
Technical Help line
01905 560219
Folded Dimensions
489mm
(19
1
/
")
4
164mm (6
Minimum Height Dimensions
5
/
")
8
897mm
5
3
/
")
(35
/
")
8
8
/
")
8
Maximum Height Dimensions
1022mm
(40
1
/
")
4
Lay the seat on its back on the floor.
When placed on the floor, the legs are locked down by the mechanism.
This seat must be attached to a vertical surface using suitable fixings appropriate to the type of surface and
loading conditions to be applied.
Adjust support legs ensuring that both legs sit firmly on a flat surface, (maximum 1 in 40 shower base slope),
when placed in the down position. Curved surfaces such as corners of bathtubs are not acceptable.
Stainless steel fixings are recommended.
You should consult a fixing manufacturer if you are unsure of which type of fixing to use, stating the type and
construction of the vertical surface and the version of seat product.
We are unable to specify the type of fixing to be used due to the vast number of possible types and conditions of
vertical surfaces to which the shower seat can be attached.
Make sure all fixing holes are used.
Do not make any holes larger. This can reduce the strength of the frame and invalidate any warranty or load
rating stated.
1
/
")
2
Install the seat. Once installed check that the plastic pivot caps are firmly in place.
Shower Seat Use
The Shower Seat must only be used for the task it is intended to perform.
482mm
Do not stand on it or misuse it. This may have serious detrimental effects on its performance and safety.
(19")
The Shower Seat should be checked as part of a planned maintenance programme.
Children and other users may require supervision when using this product.
Keeping your AKW Shower Seat Clean
This product should be cleaned periodically to remove any accumulation of hair or other waste material, using normal
domestic bathroom cleaning materials.
After cleaning always flush down with water then wipe thoroughly with a damp cloth to remove any cleaning
material residues before drying off.
Disinfecting
Where disinfecting is necessary, standard established procedures for disinfecting equipment should be used with due
care and attention taken of the warnings concerning possible effects of aggressive chemicals on plastics.
After cleaning always flush down with water then wipe thoroughly with a damp cloth to remove any cleaning
material residues before drying off.
Do not use strong or concentrated acidic, alkaline or other cleaning materials on a abrasive pad as these may discolour
or damage the product.
AKW does not approve or recommend autoclave cleaning due to the damage this can cause to the special engineering
plastics used in the construction of this product.
607mm
7
(23
/
")
8
Packaging
This Shower Seat is supplied in a polypropylene (PP) bag to keep the product unsoiled until installation; it may also be
packed in a cardboard box. Both are suitable for recycling operations and should be disposed of in accordance with
local recycling regulations.
Installation Instructions
5 4 3 2 1
X
X X X
Do not use fixings with
Countersunk heads.
X
User Care Instructions
Technical Help line
01905 560219