Canon DR-6050C - imageFORMULA - Document Scanner Benutzerhandbuch - Seite 23

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Scanner Canon DR-6050C - imageFORMULA - Document Scanner herunter. Canon DR-6050C - imageFORMULA - Document Scanner 31 Seiten. Scanner
Auch für Canon DR-6050C - imageFORMULA - Document Scanner: Broschüre & Specs (26 seiten), Easy Start Handbuch (2 seiten), Ergänzendes Handbuch (7 seiten), Broschüre & Specs (8 seiten), Broschüre & Specs (4 seiten), Broschüre & Specs (33 seiten), Taschenhandbuch (32 seiten), Broschüre & Specs (4 seiten), Wartungshandbuch (20 seiten)

[Mode]

Select the scanning mode.

[Page Size]

Select the page size of the document to be scanned.

If you select [Auto-detection], the document size is detected

automatically. The [Settings] button is also enabled with this selection.

Click the button to open a dialog box for specifying the detection area

based on the size of the document to be scanned (All Area, A4 area,

A5R area).

[Dots per inch]

Specify the scanning resolution.

[Brightness]

Adjust the brightness of scanned images.

[Contrast]

Adjust the contrast of scanned images.

[Scanning Side]

When scanning documents placed in the feeder of the connected

Canon DR-series scanner, select which sides of a document to scan.

[Deskew]

Click to ensure that if a document is scanned at an angle, the slant is

detected and straightened out in the scanned image.

[Ambient Light Canceling Mode]

Click to ensure that if you are scanning documents on the flatbed with

the document cover open, light that enters from the edges of the

document is removed in the scanned images. Depending on the

nature of the ambient light and other scanning condition settings, the

ambient light may not be completely removed.

This setting is only available when [Page Size] is set to A4 or smaller.

If you enable [Ambient Light Canceling Mode] while [Page Size] is set

to [Auto-detection] and the size detection area is set to [All Area], the

size detection area setting will change to [A4 area] automatically.

[Area]

Click this to display a dialog box for specifying the area of the

document to scan.

[More]

Click this to display the settings dialog box for the connected Canon

DR-series scanner, and configure advanced scan conditions. For

details on settings, refer to the Help for the ISIS/TWAIN driver.

[Default]

Return all configurations in the settings dialog box to their default

values.