Ametek Sorensen DLM600 M6 Handbuch Addendum - Seite 3

Blättern Sie online oder laden Sie pdf Handbuch Addendum für Stromversorgung Ametek Sorensen DLM600 M6 herunter. Ametek Sorensen DLM600 M6 15 Seiten. Option for m9g, m130 or m131

Seite drucken

1.1 INTRODUCTION

1.1.1 M6 with GPIB M9G

The option M6, herein, will describe the operation and M9G remote programming option

for the DLM600 series power supply with an Isolation and Polarity Reversal Relay PCB.

This option is assembled as a self-contained unit with newly designed extended lower

plate and top covers, which allow the user full isolation and reverse polarity capability

for both output and external sense. These units measure 21 inches from the tip of the

front panel controls to the rear panel output bars. They are about 8.5 inches wide and

1U tall. Illustrations of the DLM600's top, side, and rear views are shown on Pages 11

and 12 of this addendum.

1.1.2 M6 with Ethernet M130 and M131

This manual covers the M6 Option as it works in conjunction with M130 Remote

Programming Ethernet Option and the M131 Slave Option, for the DLM600 Series

power supplies. Specific information on M130 and M131 interface cards can be found in

the DLM Series M130/M131 Ethernet Option Programming Manual, P/N M362797-03.

1.2 FEATURES and FUNCTIONS

Transient Response Specification is 1400us

Depth is 20"

M9G - All standard features remain as described in the DLM600 Series manual and in

Section 1 of the M9 manual.

M130/M131 - Ethernet M130 and M131 features in manual, P/N M362797-03, apply.

1.2.1 Additional Features and Functions

Output voltage isolation from output load

Output local or remote

Output reverse polarity

Relay hot-switch lock-out (ensures that the voltage across the relay contacts

and the current through them, is near zero prior to changing relay states)

Relay automatically disconnects (relays automatically latch Open when a

shutdown occurs)

Addendum