Canon imageFORMULA CR-190i Handbuch für Betrieb und Wartung - Seite 12

Blättern Sie online oder laden Sie pdf Handbuch für Betrieb und Wartung für Scanner Canon imageFORMULA CR-190i herunter. Canon imageFORMULA CR-190i 31 Seiten. Cheque scanner
Auch für Canon imageFORMULA CR-190i: Installationshandbuch (19 seiten), Handbuch für Betrieb und Wartung (31 seiten), Broschüre & Specs (26 seiten), Broschüre & Specs (2 seiten), Broschüre & Specs (4 seiten)

Close the Front Maintenance Cover in the order shown in

the diagram below.

Feeding Trouble

If the document is not fed properly or the detection functions do not

work properly, remedy the problem by checking the following

conditions.

Condition

A paper jam has occurred.

Cause and

• Check to make sure that the size and thickness of the

Remedy

document are within the supported range of the

scanner, and if the quality of the paper is appropriate.

For cautions on handling documents, see

"Documents" on p. 5.

• Documents with rough surfaces may cause a paper

feed error to occur.

Scan one sheet at a time in the separation OFF mode.

(See "Separation OFF Mode," on p. 37 in Instructions.)

• Dirty or worn rollers inside the scanner may cause a

paper jam.

Clean the rollers if they are dirty. (See "Cleaning the

Scanning Glass and Rollers" on p. 15.) Worn rollers

must be replaced. Some rollers are replaceable. (See

"Replacing the Rollers" on p. 24.) If the rollers are not

replaceable, contact your local authorized Canon

dealer or service representative to have the scanner

serviced.

• The Separation Roller gap is too wide. Adjust the

Separation Roller gap. (See "Adjusting the Separation

Roller Gap" on p. 28.)

Condition

A double feed error occurred even though

documents are not being double fed.

Cause and

A double feed error may occur when documents with

Remedy

different thicknesses are mixed. Turn OFF the double

feed detection mode, if this happens.