Akw 04570/P Installations- und Pflegeanleitung - Seite 2
Blättern Sie online oder laden Sie pdf Installations- und Pflegeanleitung für Wheelchair Akw 04570/P herunter. Akw 04570/P 2 Seiten. Fold down seat
Seite drucken
Series Seat Dimensions
Series Seat Dimensions
04570/P, 04580/P
04570/P, 04580/P
All Dimensions are subject to manufacturing tolerances
Mounting Hole Dimensions
22
"
1
/
8
562mm
17
"
3
/
4
450mm
Folded Dimensions
6
"
3
/
8
161mm
5 4 3 2 1
X X X
X
Do not use fixings with Countersunk heads.
X
25
7
"
/
8
658mm
Minimum Height Dimensions
4
1
"
/
8
106mm
Maximum Height Dimensions
Installation Instructions
Lay the seat on its back on the floor.
When placed on the floor, the legs are locked down by the mechanism. Lift the seat base and legs up
together.
This seat must be attached to a vertical surface using suitable fixings appropriate to the type of surface
and loading conditions to be applied.
15
"
3
/
4
Adjust support legs ensuring that both legs sit firmly on a flat surface, (maximum 1 in 40 shower
399mm
base slope), when placed in the down position. Curved surfaces such as corners of bathtubs are not
acceptable.
Stainless steel fixings are recommended.
You should consult a fixing manufacturer if you are unsure of which type of fixing to use, stating the type
and construction of the vertical surface and the version of seat product.
We are unable to specify the type of fixing to be used due to the vast number of possible types and
conditions of vertical surfaces to which the shower seat can be attached.
Make sure all fixing holes are used.
Do not use Countersunk fixing or make any holes larger. This can reduce the strength of the frame and
invalidate any warranty or load rating stated.
Take care not to damage the painted surface.
Install the seat. Once installed check that the plastic pivot caps are firmly in place.
15
3
"
/
4
User Care Instructions
401mm
Shower Seat Use
The Shower Seat must only be used for the task it is intended to perform.
Do not stand on it or misuse it. This may have serious detrimental effects on its performance and safety.
The Shower Seat should be checked as part of a planned maintenance programme.
Children and other users may require supervision when using this product.
Keeping your AKW Shower Seat Clean
This product should be cleaned periodically to remove any accumulation of hair or other waste material,
using normal domestic bathroom cleaning materials.
After cleaning always flush down with water then wipe thoroughly with a damp cloth to remove any
cleaning material residues before drying off.
20
3
"
/
Disinfecting
4
526mm
Where disinfecting is necessary, standard established procedures for disinfecting equipment should be used
with due care and attention taken of the warnings concerning possible effects of aggressive chemicals on
plastics.
Do not use strong or concentrated acidic, alkaline or other cleaning materials on an abrasive pad as these
may discolour or damage the product.
AKW does not approve or recommend autoclave cleaning due to the damage this can cause to the special
engineering plastics used in the construction of this product.
Packaging
This Shower Seat is supplied in a polypropylene (PP) bag to keep the product unsoiled until installation; it
may also be packed in a cardboard box. Both are suitable for recycling operations and should be disposed of
in accordance with local recycling regulations.
Installation Instructions
Installation Instructions