Astro Pneumatic 1442 Handbuch - Seite 3

Blättern Sie online oder laden Sie pdf Handbuch für Werkzeuge Astro Pneumatic 1442 herunter. Astro Pneumatic 1442 4 Seiten. 13 inch nut/thread setting hand riveter kit with 3pc metric and 3pc sae mandrel/nosepiece sets and rivet nut assortment

Seite drucken

MODEL:

ADJUSTMENT INSTRUCTIONS:

1. Proper adjustment of the riveter is necessary for efficient

and easy operation.

2. The adjustment of the riveter will vary, depending on the

size and type of rivet nut being used and the hole size.

3. Adjust the riveter by opening the handles outward as far as

possible lossening the #4 adjusting nut and turning the #3

outer sleeve clockwise to increase the number of threads on

the mandrel protruding beyond the nosepiece for larger rivet

nuts, and by turning the #3 outer sleeve counterclockwise

for smaller rivet nuts. Once adjustment is set tighten the #4

adjusting nut by hand. Fine adjustment can be made by

turning the rivet nut on the mandrel to position the rivet nut

closer or further away from the nosepiece, as long as the

mandrel is threaded all the way through the rivet nut.

4. Always assure that the mandrel is threaded into all threads

of the rivet nut to prevent damage to the threads on the

mandrel and/or the rivet nut.

5. If the handles are extended too far outward to provide

enough leverage to pull the handles inward to set the rivet

nut, turn the #3 outer sleeve clockwise or turn the rivet nut

counterclock wise slightly to change the handle angle to

provide the proper leverage.

Riveter properly prepared

for setting rivet nuts

Store matching nosepieces and mandrels

together when not in use to prevent mismatching

the sizes and for convenience.

1442

PRODUCT TYPE:

13" NUT/THREAD SETTING HAND RIVETER KIT

WITH 3PC METRIC AND 3PC SAE MANDREL/NOSEPIECE SETS

AND RIVET NUT ASSORTMENT

Open handles

and thread

rivet nut

onto mandrel

Page 3

Turn knob

counterclockwise

after rivet nut

setting is

complete to

remove riveter

from the rivet nut