Dorani Limited 600 Series Installations- und Benutzerhandbuch - Seite 5
Blättern Sie online oder laden Sie pdf Installations- und Benutzerhandbuch für Intercom System Dorani Limited 600 Series herunter. Dorani Limited 600 Series 9 Seiten. 7” colour video intercom system memory & non-memory models
Seite drucken
Note:
-
Signal Cables are looped from monitor to monitor (Max 70m Door to furthest
monitor)
-
Monitors are powered individually
-
Cat 5 is recommended cable, utilise 1 pair per signal conductor (Diagram 1)
Monitor Connections
Door Station 1
Power
Terminal 1 = Audio Signal
Terminal 2 = Ground
Terminal 3 = Voltage
Terminal 4 = Video Signal
Additional monitors connect in common with Terminal s 1-4 (Diagram 1)
2 Door stations require 2 separate trunk lines – cabled like 2 separate systems (Diagram 4)
Master Monitor Jumper
st
J1 = ON for 1
monitor in Loop, OFF all other times. (Refer Diagrams)
Video Termination – IMPORTANT
J2 = ON for Last monitor in Loop, OFF all other times. (Refer Diagrams)
Door Station Connections
Note: Door station provides clean set of contacts for lock release, separate power to be
supplied if power unlocking is required.
Terminal 1 = Audio Signal
Terminal 2 = Ground
Terminal 3 = Voltage
Terminal 4 = Video Signal
RECOMMENDED TERMINATION SAMPLE (Diagram 1)
WIRING AND INSTALLATION
(Sample Diagrams Pages 5-6)
Door Station 2
Terminal 1 = Blue + Blue/White (Audio Signal , Blue Connector)
Terminal 2 = Green + Green/White (Ground, Black Connector)
Terminal 3 = Brown + Brown/White (Voltage, Red Connector)
Terminal 4 = Orange + Orange/White (Video Signal, Yellow Connector)
Each signal conductor = Colour + Mate
4