Astro Pneumatic ADG100 Handbuch - Seite 4

Blättern Sie online oder laden Sie pdf Handbuch für Adapter Astro Pneumatic ADG100 herunter. Astro Pneumatic ADG100 7 Seiten. Grease gun drill adapter

Seite drucken

MODEL:

VI. OPERATION

1. Set your power tool to "FORWARD" mode, "reverse" mode is not recommended.

2. Evacuate air pocket from container tube if necessary. (See instructions on Page 6)

3. Insert the end of the grease coupler at the end of the hose onto your intended grease fitting. Ensure that the

coupler's adjustable jaws are at the tightness you require.

4. Depress the trigger on your power tool to start work.

Switch operation:

When the trigger switch is depressed, the tool rotates.

When the trigger switch is released, the tool stops.

5. The end of operation

Take off the battery pack or air source in advance to avoid accidents.

Do not exceed recommended pressure when operating to avoid serious injury or mechanical damage.

Read your power tool's safety instruction manual carefully before using this universal

coupling-greaser.

* CAUTION:

• To reduce the risk of injury, keep hands and away from the outlet and all moving parts.

• Release the trigger when grease filling is full. If switched repeatedly, it could cause the Motor to

overheat, resulting in mechanical damage or injury.

* NOTE: A buzzing noise is produced when the motor is about to operate on brushed motor power

tools, this noise is normal.

VII. SAFETY INSTRUCTION

• Although the products described in this catalogue have been designed and manufactured to the highest

standard of quality and safety, they are powerful devices capable of producing high pressure. Misuse or

misapplication of this equipment can cause component rupture, fire or explosion and result in serious

bodily injury, including fluid injection or splashing in the eyes or on the skin. Seek medical attention

immediately if such injuries occur. The attending doctor will need to know the exact nature of the fluids

injected into the victim before treatment can begin.

• Any pressurized system is only as strong as its weakest component. Never exceed the maximum working

pressure of the lowest-rated component in the system. Check and tighten all connections, fitting and hoses

regularly. A worn or damaged hose can rupture, harming both people and property.

• Do not hold nylon hose while pumping the grease gun.

• Regular product inspection and maintenance, coupled with responsible operation, are required for

continued safe operation of these products.

• Always wear safety glasses or eye shields when operation power tools.

ADG100

WARNING

PRODUCT TYPE:

GREASE GUN DRILL ADAPTER

Page 4