Astro Pneumatic 8202 Handbuch

Blättern Sie online oder laden Sie pdf Handbuch für Zubehör für das Schweißen Astro Pneumatic 8202 herunter. Astro Pneumatic 8202 3 Seiten. Universal welding cart

Seite drucken

Product Information

• Heavy duty steel construction

• Heavy duty wheels - two 7.5" solid wheel and two 3" Swivel

• 3 shelves for easy access to supplies

• Cart size: 27-1/2"(L) x 16-1/3"(W) x 28"(H)

• Top shelf size: 17-3/4"(L) x 11-1/2"(W)

• Bottom shelf size: 27-1/2"(L) x 11-1/2" (W)

• Weight Capacity: 176lbs. Approximately

Important

8202

UNIVERSAL WELDING CART

www.astrotools.com

1 YEAR LIMITED WARRANTY

•Astro Pneumatic Tool Co. warrants our products to the original user against

defective material or workmanship for a period of 1 year from the date of 1st use.

Astro reserves the right to determine whether the product failed because of defective

material, workmanship or other causes and to charge back for missing parts. Astro

Pneumatic Tool Co., at its discretion, will repair products covered under this warranty

free of charge. The original user is to return the product (with the exceptions listed

below) with the distributor's name, address, adequate proof of date of purchase or a

copy of warranty card, and a short note explaining the problem. Failures caused

by accident, alteration, or misuse are not covered by this warranty.

•If one part of this product fails, please do not return the entire product.

Astro will replace free of charge component parts of this product that fail

within 1 year of first use by the original user. Items included in this category

include but are not limited to kits, hand tool kits and any other product where

there are multiple items or components that make up the unit. Please contact

the phone number below in order to obtain the replacement components

covered under warranty.

•Astro Pneumatic Tool Co. or its authorized service representatives must perform all

warranty repairs. Any repair to the product by unauthorized service representatives

voids this warranty. The rights under this warranty are limited to the original user

and may not be transferred to subsequent owners.

•This warranty is in lieu of all other warranties, expressed or implied, including

warranties of merchantability and fitness for a particular purpose. Some states do

not allow the exclusion of limitations of incidental or consequential damages so the

above limitations may not apply to you. All claims must be sent to:

Astro Pneumatic Tool Company

372 Old US Highway 52 South

Mt. Airy, NC 27030

PLEASE DO NOT RETURN ANY PRODUCT WITHOUT CALLING

1-800-221-9705 FOR INSTRUCTIONS

When unpacking, check the parts diagram and part number

listing on page 3 to make sure all parts are included. If any

parts are missing or damaged, please call your distributor.

UNIVERSAL WELDING CART

Page 1

Unpacking