Canon imageFormula DR-C225W Handbuch für Wi-Fi-Verbindungen - Seite 3
Blättern Sie online oder laden Sie pdf Handbuch für Wi-Fi-Verbindungen für Scanner Canon imageFormula DR-C225W herunter. Canon imageFormula DR-C225W 40 Seiten.
Seite drucken
The scanner should always be turned off when pressing the WIRELESS
switch to enable the Wi-Fi function.
(3) WPS/RESET Button
Press to connect with a WPS-compatible access point, or to initialize
the scanner's Wi-Fi settings.
Holding this button while turning on the scanner resets it to the
factory default settings.
(4) Lamp
The following lamps indicate the scanner state.
Lamp
CONNECTION
Lit (green)
Blinking
green
Blinking red
Blinking
orange
AP
Lit (green)
Unlit
STATUS
Blinking
green
WIRELESS
Lit (green)
Unlit
* One of two network modes of the scanner. Change the mode depending
on the device that will be connected via Wi-Fi. For details, see "Network
modes" on p.3.
Meaning
AP mode*: Wireless LAN working
Station mode*: connecting to the access point
WPS executing
WPS Error
(Station mode only) Searching for an access
point
Operating in AP mode
Operating in Station mode
Transferring data
Wi-Fi enabled (USB disabled)
Wi-Fi disabled (USB enabled)
About Wi-Fi Connections
Connect the scanner to an access point or directly to a computer
according to the network environment.
Network modes
Depending on the device that will be connected to the scanner via Wi-Fi,
you can change the network mode of the scanner as follows.
Network mode
Station mode
The scanner operates as a wireless device. In this mode, a
separate wireless access point device is necessary for the
scanner to connect to the computer.
AP mode
The scanner operates without another wireless access
point. A 1-to-1 connection can be established between the
scanner and the computer.
Connecting via a wireless access point (station mode connection)
3
Description
Connection to the scanner can be
made using the wireless settings of the
computer connected to the wireless
LAN access point.
See "Connecting Using the Wireless
Settings on the Computer" on p.6
If the wireless access point is WPS-
compatible, connection to the scanne'r
can be made using the WPS feature.
See "Connecting using the WPS
function" on p.11