Flying Industry Development S1XB-AC220-ANT2 Kurzanleitung

Blättern Sie online oder laden Sie pdf Kurzanleitung für Fernsteuerung Flying Industry Development S1XB-AC220-ANT2 herunter. Flying Industry Development S1XB-AC220-ANT2 2 Seiten. Rf wireless remote control radio controller / transmitter & receiver

Seite drucken
RF Wireless Remote Control Radio Controller / Transmitter & Receiver
Package Include:
12 x Receiver: S1XB-AC220-ANT2 (1 Channel / Three Control Modes)
1 x Transmitter: CB-12
1 x User manual
Feature:
Wireless control, easy to install
Control Lights, Motors, Fans, electrically operated Doors / Locks / Windows / Blinds / Cars or Other Appliances with AC 110~240V or DC 0~28V.
You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass
through walls, floors and doors.
With characteristics of reverse power protection and over current protection
Audible / visual indication
Use microcontroller model of EM78P156, an 8-bit microprocessor designed and developed with low-power and high-speed CMOS technology.
Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code.
One/several transmitters can control one/several receivers simultaneously.
If you use two or more receivers in the same place, you can set them with different codes.
Transmitting Frequency: 315MHz / 433MHz
Working distance of transmitter and receiver with external extend antenna: 2000M / 6000ft (theoretically)
Receiver:
Model No.: S1XB-AC220- ANT2
Channel: 1 CH
Control Modes: Toggle, Momentary, Latched
Coding Type: Fixed code
Coding Setting: By learning
Power Supply (Operating Voltage): AC100~240V (S1XB-AC220-ANT2)
Output: AC 100~240V
PCB size: 75mm x 54mm x 22mm
Case size: 79mm x 58mm x 36mm
Maximum Working Current: 10A
External Extend Antenna:
Frequency Range: 300~450MHz
Impedance: 50Ω
Antenna Length: 15cm
Cable Length: 150cm
Weight: 35g
Anti-interference, waterproof, shielded wire set inside
Magnetic stand design for easy to install
Transmitter:
Model No.: CB-12
Channel: 12 CH
Remote Control Distance: 1000m / 3000ft (theoretically)
Encode: Fixed code by soldering
Unit size: 135mm x 42mm x 25mm
Power Supply: 1 x 6F22-9V battery (included, can be used for 12 months)
Usage:
Setting different control modes (We have set the receiver as Toggle control mode before delivery. If you want to use other control modes, do as
following):
1) Setting control mode Toggle: Only connect Jumper-2.
Press button 1: Turn on the relay, terminal OUT of receiver 1 outputs AC power.
Press button 1 again: Turn off the relay, terminal OUT of receiver 1 no output.
...
Press button 12: Turn on the relay, terminal OUT of receiver 12 outputs AC power.
Press button 12 again: Turn off the relay, terminal OUT of receiver 12 no output.
2) Setting control mode Momentary: Only connect Jumper-1.
Press and hold button 1: Turn on the relay, terminal OUT of receiver 1 outputs AC power.
Release button 1: Turn off the relay, terminal OUT of receiver 1 no output.
...
Press and hold button 12: Turn on the relay, terminal OUT of receiver 12 outputs AC power.
Release button 12: Turn off the relay, terminal OUT of receiver 12 no output.
SHENZHEN GUIYUAN INDUSTRY DEVELOPMENT CO.,LTD
Http://www.carymart.com