Astro Pneumatic Tool DS2000 Handbuch - Seite 4

Blättern Sie online oder laden Sie pdf Handbuch für Werkzeuge Astro Pneumatic Tool DS2000 herunter. Astro Pneumatic Tool DS2000 6 Seiten. Pneumatic door skin remover tool

Seite drucken

Maintenance instruction:

1)Lubrication:

After 3 to 4 hours of operation, oiling

may be necessary again.

2)Tightness of parts:

Regularly check whether all connecting parts are

fastened securely. Follow this procedure daily

before beginning work.

3)Cleanness:

Dust may accumulate around spindle inside

shield. It is recommended to remove

the dust on daily basis.

4)Storage:

Avoid storing the tool in a location subject to high

humidity. If the tool is left unused, the residual

moisture inside the tool can cause rust. Before

storing and after operation, oil the tool at the air

inlet with spindle oil and run it for a short period.

5)Disposal:

Follow national legislation of Waste disposal. Never

drop into fire.

6)Ordering service part:

For further operational and handling information or

for replacement of parts and components, contact the

sales agent from where you purchased the tool, or the

service division of our company.

In ordering parts and components, give each part

number, name and quantities.

1) The tool shall not be used in potentially explosive

atmospheres.

2) Disconnect the air hose before changing or

adjusting any inserted tools.

3) Before using tool, please confirm all couplings

and plugs are fixed securely. Air hose that is under

pressure may lash out when disconnected

and could lead to serious injuries.

4) Prevent loose clothes, long hair or any other

personal accessories from coming close to moving

parts to reduce the risk of being caught, trapped

or drawn into the rotating spindle.

5) Excessive high air pressure, that exceeds the

maximum pressure, may cause injuries to user.

6) Exposure to strong vibration for extended time

may cause harm to operator.

7) Make sure of the rotation direction before starting

the tool to reduce hazardous situations due to

unexpected rotation direction.

Model:

DS2000

8) Slip/Trip/Fall is a major reason of serious injury or death.

Beware of excess hose left on the walking or work surface.

9) Wearing eye/face protector could reduce the danger to

person from high speed splinters being emitted from the

tool or work surface.

10) Wearing correct breathing protection will help avoid

inhaling dust or handling debris form work process that

can be harmful to your health.

12) High sound level can cause permanent hearing loss.

Use hearing protection while operating tool.

13) Due to the material being processed, there may be a

risk of explosion or fire. Be aware of work surface dangers

prior to beginning work.

14) There is a risk of being cut due to high speed

rotation. Do not touch high speed rotating parts.

15) This power tool is not insulated. If contact is made with

an electric current injury may occur.

16) Dust created by sanding, sawing, grinding, drilling and

other related activities may expose the user to dust and/or

microscopic particles that may contain chemicals known to

the State of California to cause cancer, birth defects or

other reproductive harm.

Users of this tool should review the chemical composition

of the work surface and any products used in conjunction

with the operation of this tool for any such chemicals prior

to engaging in any activity that creates dust and/or

microscopic particles.

Users should obtain the Material Safety Data Sheets for all

identified chemicals, either from the manufacturer or their

employer, and proceed to study, understand, and follow all

instructions and warnings for exposure to such chemicals.

Some examples of these chemicals are: lead from lead-

based paints; crystalline silica from bricks, cement and

other masonry products; and arsenic and chromium from

chemically treated lumber. A listing of the chemicals can

be obtained from www.oehha.ca.gov under Proposition 65.

In order to reduce their exposure to such chemicals, users

should always:

work in well-ventilated areas.

wear appropriate safety equipment and clothing that are

specifically designed to filter out microscopic particles.

Cautions for Use

1) Always wear ear protection and safety glasses when using

this tool. Gloves and protective clothing are recommended.

2) Personal protection and dust collection devices shall be

chosen according to the material being worked upon. Please

consult provider of such devices.

3) Basic safety instructions and warnings must always be

followed. in addition, safety instructions & warnings identified

in ANSI B186.1 Safety Code for Portable Air Tools must be

followed. For further ANSI information see www.ansi.org or

call (212) 642-4900