Flying Industry Development S2PF-DC24 Kurzanleitung - Seite 2

Blättern Sie online oder laden Sie pdf Kurzanleitung für Fernsteuerung Flying Industry Development S2PF-DC24 herunter. Flying Industry Development S2PF-DC24 3 Seiten. Rf wireless remote control kit

Seite drucken
Setting control mode Momentary: Only connect Jumper-1 (CN1)
Press and hold button ▲ on the left: motor 1 rotates in positive direction. Release button ▲ on the left: motor 1 stops.
Press and hold button▼ on the left: motor 1 rotates in reversal direction. Release button ▼ on the left: motor 1 stops.
Press and hold button ▲ on the right: motor 2 rotates in positive direction. Release button▲ on the right: motor 2 stops.
Press and hold button▼ on the right: motor 2 rotates in reversal direction. Release button ▼ on the right: motor 2 stops.
Limit control terminals:
Limit control terminals S1, S2, S3 and S4 are normally open, you can connect limit switches or sensors (normally open type) to terminals S1, S2, S3
and S4, and then you can use limit switches or sensors to stop the motor.
When motor 1 rotates in positive direction, if connect two terminals of S1, the motor 1 will stop automatically.
When motor 1 rotates reversal direction, if connect two terminals of S2, the motor 1 will stop automatically.
When motor 2 rotates in positive direction, if connect two terminals of S3, the motor 2 will stop automatically.
When motor 2 rotates reversal direction, if connect two terminals of S4, the motor 2 will stop automatically.
Wired control terminals:
You can connect manual switches, external devices or sensors (with low level output signal) to control the motor.
1) The manual switches:
You can connect manual switches to terminals "Signal-", "Signal 1+", "Signal 2+", "Signal 3+", "Signal 4+", then you can use manual switches to
control the motor.
When connect terminals "Signal 1+" and "Signal-", motor 1 rotates in positive direction. And when disconnect "Signal 1+" and "Signal-", motor 1 stops.
When connect terminals "Signal 2+" and "Signal-", motor 1 rotates in reversal direction. And when disconnect "Signal 2+" and "Signal-", motor 1
stops.
When connect terminals "Signal 3+" and "Signal-", motor 2 rotates in positive direction. And when disconnect "Signal 3+" and "Signal-", motor 2 stops.
When connect terminals "Signal 4+" and "Signal-", motor 2 rotates in reversal direction. And when disconnect "Signal 4+" and "Signal-", motor 2
stops.
2) Signal input:
You can connect external devices (with low level output signal) to terminals "Signal-", "Signal 1+", "Signal 2+", "Signal 3+", "Signal 4+", then the
external device's output signal can control the motor.
When the external device outputs low level signal to terminal "Signal-" and "Signal 1+", motor 1 rotates in positive direction.
When the external device outputs low level signal to terminal "Signal-" and "Signal 2+", motor 1 rotates in reversal direction.
When the external device outputs low level signal to terminal "Signal-" and "Signal 3+", motor 2 rotates in positive direction.
When the external device outputs low level signal to terminal "Signal-" and "Signal 4+", motor 2 rotates in reversal direction.
How to pair the transmitter to the receiver:
1) Press the learning button of receiver for 1- 2 seconds; signal LED on the receiver is on. The receiver enters into status of LEARNING.
2) Press any one button on transmitter. If signal LED flashes quickly 15 times and turns off, it means learning is successful.
3) When receiver is in the status of LEARNING, press again the button of receiver, signal LED turns off, learning process will be discontinued.
4) The receiver can learn several remote controls with different codes.
Delete all transmitters:
We have learned remote control to the receiver. If you don't want the receiver to work with the remote control, you can delete all codes of remote
controls, which are stored in the receiver.
Operation: Press and hold the button of receiver until signal LED flashes slowly; release the button, LED keeps slow flash. That means all stored
codes have been deleted successfully.
SHENZHEN GUIYUAN INDUSTRY DEVELOPMENT CO.,LTD
Http://www.carymart.com