Astro Pneumatic Tool 3026 Handbuch - Seite 3
Blättern Sie online oder laden Sie pdf Handbuch für Sander Astro Pneumatic Tool 3026 herunter. Astro Pneumatic Tool 3026 4 Seiten. 12v cordless variable speed palm polisher w/ 2 batteries
Seite drucken
Model:
3026
8. Only the battery pack supplied in this kit can be used for the polisher. Other types may cause fire or other dangers.
9. Do not store the battery pack in a container with other metal objects such as nails, coins, etc.
10. Do not short the battery pack, a battery short can cause a large current flow, overheating, possible
burn and even a fire.
11. Do not expose the battery pack to water or rain.
12. Do not carry the battery pack in a pocket containing any metal objects.
13. Do not store the battery pack in locations where the temperature may reach or exceed 50°C (182°F).
14. Do not incinerate the battery pack even if it is severely damaged or is completely worn out.
15. If batteries leak, avoid contact with the liquid. Should contact occur, wash immediately with soap and water.
16. Make sure the switch is in the off position before inserting the battery pack into the polisher to avoid damages
caused by accidental starting.
BATTERIES AND BATTERY CHARGER
1. Unplug your battery charger when you are not charging your batteries.
2. If your battery pack is hot, let it cool before recharging.
3. Do not charge batteries in direct sunlight.
4. Keep your battery charger clean, and while unplugged wipe out the cavity with a dry cloth,
never use water or solvents.
CHARGING THE BATTERY
CAUTION
Charge only the 12 volt battery with your charger supplied in this kit, other types may burst causing damage or
personal injury. Your new battery pack is not fully charged when received; therefore, charging is necessary prior to use.
1. Plug the charger into a 120 V power source and insert the battery pack into the charger receptacle pocket.
Make sure that the polarity rib in the battery pack is aligned with the polarity slot in the charger. There are plus and
minus symbols on either side of the battery pack that designate the polarity of the terminals. These symbols are on
the same sides as their respective symbols on your charger. In order for the charger to work properly the pack
must be fully inserted into the charger receptacle pocket. When fully inserted into the pocket a light will come on.
2. Use only (120 volts, 60HZ AC only) regular household voltage.
3. Do not attempt to use a step-up transformer, an engine generator or DC power receptacle.
4. Do not allow anything to cover or clog the charger vents.
5. Before connecting the charger to a power source, be certain the voltage supplied is the same as power
requirement specified on the charger. Mismatched voltage source can result in serious injury to the user.
When in doubt, don't plug in the charger.
6. Do not operate charger if damaged in any way. Do not operate the charger with a damaged cord. Return charger
to the place of purchase. To prevent damage to the cord when disconnecting charger from power source, grip plug
body when removing it from a receptacle.
7. Unplug charger from outlet before attempting maintenance or cleaning.
8. When not in use with a battery pack, the battery can be connected with the charger (indicated by the red light)
without any adverse effect; the batteries can't be "over-charged". However, if the battery pack is not going to be
used for an extended period time, the charger should be unplugged from its power source.
Product Type:
12V CORDLESS VARIABLE SPEED
PALM POLISHER W/ 2 BATTERIES
Page 3