Flying Scot Centerboard Cable Anweisungen - Seite 2

Blättern Sie online oder laden Sie pdf Anweisungen für Bootsausrüstung Flying Scot Centerboard Cable herunter. Flying Scot Centerboard Cable 2 Seiten.

Seite drucken

5. Feed the loop-end of the cable through the centerboard sheave, going over the top of the sheave, down

through the board, and forward to the shackle

6. Lead the loop forward and anchor it to the shackle between the legs of the mast support (stanchion)

7. Hold tension on the cable and feed it to PORT as you wind the winch by means of the pennant

Note 1: The wind of the cable should look similar to what you see in the photo

Note 2: Winding the cable to port will give the winch a starboard component and keep the winch drum

from rubbing. It must run free. Once the cable is wound properly, it will have enough memory to return

to its wind. Never lower the board without control on the line. Do not let it drop free.

These instructions are intended for the exclusive use of Flying Scot, Inc. customers. Any unauthorized use is strictly prohibited.

Note: Both images are from the bow of the boat looking aft