Astro-Gadget EQStar Benutzerhandbuch - Seite 14

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Teleskop Astro-Gadget EQStar herunter. Astro-Gadget EQStar 17 Seiten.

EQStar User Guide

6. EQStar control via ZWO ASIAir Pro

The ZWO ASIAir Pro astronomic controller is a popular control box for scripted automated

astrophotography, for use principally with ZWO imagers. (see

camera.com/product/asiair-pro

EQStar can be controlled via an ASIAir Pro controller via USB or WiFi.

6.1. ASIAir Pro control via USB

USB is likely simpler: just use the supplied USB cable connected to the PC port on the EQStar and to

a USB port on the ASIAir.

In the telescope settings form of the ASIAir Pro, choose 'EQMOD with SkySafari' with a 9600 baud

serial connection:

6.2. ASIAir Pro control via WiFi

For WiFi connections, the EQStar must be started with WiFi turned on. Slide the Wifi slider switch

on the EQStar to the right. If the EQStar is powered via the ASIAir Pro, turn both on at the same

time. The EQStar should beep 3 times and the WiFi indicator LED should be lit.

Connect the ASI Air to your home network or the ASIAir Pro network. Once this is complete, launch

the ASIAir app, turn on station mode and connect to the EQStar network.

Finally, set the ASIAir Pro telescope settings to use 'EQMOD for SkySafari' with an IP address of

192.168.4.1 and port of 11880:

)

www.astro-gadget.com

https://astronomy-imaging-