Astro-Gadget GuideDream ST-4 Schnellstart-Handbuch - Seite 2
Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Adapter Astro-Gadget GuideDream ST-4 herunter. Astro-Gadget GuideDream ST-4 6 Seiten. Usb autoguiding adapter
Seite druckenIntroduction
USB adapter GuideDreamST4 is designed to control the mounts on which there is
a port of autoguider ST-4, during astro photography. GuideDreamST4, is
compatible with many operating systems and does not require an additional
power source. This is a small but important part of the overall system, which
allows you to economically automate your telescope for long exposures in
astrophotography. GuideDreamST4 works through an ASCOM or INDI driver and
can be used with the following software packages: AstroArt, PRISM 8,
GuideMaster, PHD-Guide, Maxim DL, IRIS, AstroSnap, ProGuider, MetaGuide and
many others compatible with ASCOM v6.
Features
• Connects directly to the USB port of your computer.
• Receives power from the computer via a USB port, so no additional power
supply is required.
• Works with ST-4 compliant autoguiding ports.
• Provides galvanic isolation between mount and computer.
• The red LED indicates the status of the connection.
• Two blue LEDs are used to indicate the state of the autoguiding in the RA axis.
• Two green LEDs are used to indicate the state of the autoguiding in the DEC
axis.
ST-4 interface the following pinout of the RJ12 socket:
•
(1) Open or sometimes powered
•
(2) Common (ground)
•
(3) RA+
•
(4) Dec+
•
(5) Dec-
•
(6) RA-
1 2 3 4 5 6