Cointra APOLO 500 DC B Gebrauchsanweisung, Installation und Montage - Seite 3

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung, Installation und Montage für Heizgerät Cointra APOLO 500 DC B herunter. Cointra APOLO 500 DC B 7 Seiten. Electric thermal radiator apolo dc b series

Seite drucken

3. ELECTRIC CONNECTION

The thermal radiator must connect to the mains (230V~ 50 Hz c.a.). In addition the following
warnings must be taken into account:
-The electric radiator should not be located underneath a light switch where you need
to stretch over to reach..
4. ASSEMBLY
The thermal radiator shall be fixed to the wall by the adjustable brackets supplied with the device,
using the cardboard template provided in the box.
If for any reason cardboard template is missing you can follow the instructions below:
1. Make sure you keep your eye on where the lower hole on the wall is.
ITEM
APOLO 500 DC B
APOLO 750 DC B
APOLO 1000 DC B
APOLO 1200 DC B
APOLO 1500 DC B
(*)The first number corresponds to the number of plastic supports on which the radiator hangs and the
second corresponds to the number of housings which fixes the radiator.
2. Place screws in each of the brackets made by matching up the lower hole. Then mark
upper holes of each support.
3. Drill the wall, place the plugs in, screw the housings and hang
the radiator.
4. Support plate, tighten the screw at
the top until radiator is set in position.
nº
Height
supports
A
B
(*)
80
150
2+1
240
80
2+1
320
160
2+1
400
160
2+1
560
320
2+1
2