Canon 2507A002 Anweisungen - Seite 2

Blättern Sie online oder laden Sie pdf Anweisungen für Kameraobjektiv Canon 2507A002 herunter. Canon 2507A002 2 Seiten. Ef lens

Seite drucken

5. Hood

The lens hood can keep unwanted light out of the lens, and

also protects the lens from rain, snow, and dust.

EF24mm f/2.8

To attach the hood, align the hood's attachment position

mark with the red dot on the front of the lens, then turn the

hood in the direction of the arrow until the lens's red dot is

aligned with the hood's stop position mark

EF24mm f/2.8, EF28mm f/2.8, EF35mm f/2, EF50mm

f/1.0L USM, EF50mm f/1.8, and EF85mm f/1.2L USM

Press the buttons on both sides of the hood to attach

The hood can be reverse-mounted on the lens for storage.

• Part of the picture may be blocked if the hood is not

attached properly.

• When attaching or detaching the hood, grasp the base of

the hood to turn it. To prevent deformation, do not grasp

the rim of the hood to turn it.

6. Filters

You can attach filters to the filter mounting thread on the

front of the lens

• Only one filter may be attached.

• Use a polarizing Canon filter.

Filter Holder for the EF15mm f/2.8 Fish-eye

There is a gelatin filter holder at the rear of the lens

the gelatin filter to fit within the white frames. Then insert

the gelatin filter into the filter holder.

Specifications

Angle of view

Diagonal

Vertical

EF15mm f/2.8 Fish-eye

180°

EF24mm f/2.8

84°

EF28mm f/2.8

75°

EF35mm f/2

63°

EF50mm f/1.0L USM

46°

EF50mm f/1.8

46°

EF85mm f/1.2L USM

28°30'

*1 Built-in gelatine filter holder

*2 Built-in

CT1-7543-005

The lens length is measured from the mount surface to

the front end of the lens. Add 21.5 mm when including

the lens cap and dust cap. (Add 16.8 mm for EF15mm

f/2.8 Fish-eye)

The size and weight listed are for the lens only, except as

indicated.

Aperture settings are specified on the camera.

All data listed is measured according to Canon

❾

standards.

Product specifications and appearance are subject to

change without notice.

❽

Case and hood not provided with some models.

Filters sold separately.

This device complies with Part 15 of the FCC Rules. Operation

is subject to the following two conditions: (1) This device may

not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause

undesired operation.

Do not make any changes or modifications to the equipment

unless otherwise specified in the instructions. If such changes

or modifications should be made, you could be required to stop

operation of the equipment.

This equipment has been tested and found to comply with the

limits for a class B digital device, pursuant to part 15 of the FCC

Rules.

. Cut

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if

not installed and used in accordance with the instructions, may

cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur

in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the

following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Consult the dealer or an experienced radio/TV technician for

help.

This Class B digital apparatus complies with Canadian ICES-003.

Lens

Minimum

construction

aperture

Horizontal

—

7-8

53°

74°

10-10

46°

65°

5-5

38°

54°

5-7

27°

40°

9-11

27°

40°

5-6

16°

24°

7-8

Max.

Min. focusing

Filter diameter

magnification

distance

0.14 ×

0.2 m/0.7 ft.

0.16 ×

0.25 m/0.8 ft.

58 mm

0.13 ×

0.3 m/1 ft.

52 mm

0.23 ×

0.25 m/0.8 ft.

52 mm

0.11 ×

0.6 m/2 ft.

72 mm

0.15 ×

0.45 m/1.5 ft.

52 mm

0.11 ×

0.95 m/3.2 ft.

72 mm

●

❽

❾

●

Max. diameter and length

73 × 62.2 mm (2.9" × 2.4")

330 g/11.6 oz.

67.5 × 48.5 mm (2.7" × 1.9")

270 g/9.5 oz.

67.4 × 42.5 mm (2.7" × 1.7")

185 g/6.5 oz.

67.4 × 42.5 mm (2.7" × 1.7")

210 g/7.4 oz.

91.5 × 81.5 mm (3.6" × 3.2")

985 g/34.7 oz.

67.4 × 42.5 mm (2.7" × 1.7")

190 g/6.7 oz.

91.5 × 84 mm (3.6" × 3.3")

1025 g/36.2 oz.

●

Weight

Hood

Case

LP814

EW-60 II

LP811

EW-65 II

LP1011

EW-65 II

LP1011

ES-79 II

LP1219

ES-65 III

LP1014

ES-79 II

LP1219

2008.5