Canon CN-E30-105mm T2.8 L S Betriebshandbuch - Seite 4

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Kameraobjektiv Canon CN-E30-105mm T2.8 L S herunter. Canon CN-E30-105mm T2.8 L S 6 Seiten. Digital cinema lens
Auch für Canon CN-E30-105mm T2.8 L S: Handbuch (43 seiten)

Seite drucken

Canon CN-E30-105mm T2.8 L S Betriebshandbuch

Dimensions of parts

S type (EF mount)

SP type (PL mount)

Spur gear specifications

Focus drive gear

Number of teeth

133

Module

0.8 metric module

P.C.D.

106.4 mm

Angular rotation

300 degrees

GENERAL SAFETY INFORMATION

The safety warnings and cautions provided on the product or in this operation manual must be observed. Failure to

observe these warnings and cautions may result in injury or accident.Read this operation manual carefully to familiarize

yourself with its contents and ensure that you can operate the product properly.

Also, store this manual in a safe place where it can easily be referenced whenever necessary.

This operation manual uses the following symbols and terms to identify hazards in order to prevent accidents.

This indicates a potentially hazardous situation which, if not heeded, may result in

WARNING

death or serious injury to you or others. Be sure to heed all warning notices to ensure

safe operation at all times.

This indicates a potentially hazardous situation which, if not heeded, may result in a

CAUTION

minor injury to you or others, or damage to property.

This indicates cautions and recommendations for operation. It contains information

NOTE

which, if not heeded, may result in this product failing to function properly. These no-

tices also contain useful information for operation.

HANDLING THE PRODUCT

WARNING

1. Do not stare at the sun or other bright objects through the lens. It may injure your eyes.

CAUTION

1. Ensure that all mountings are securely tightened. If a mounting becomes loose, parts may fall off and cause

injury.

2. Inspect mountings regularly (about every six months to one year) to ensure they are securely tightened. If a

mounting becomes loose, parts may fall off and cause injury.

NOTE

1. Do not expose the lens to strong impact. Striking or dropping the lens may cause the malfunction of the product.

2. This product is not waterproof. Take measures to avoid direct contact with rain, snow, or moisture. Otherwise it

may cause the malfuction of the product.

3. Take measures to avoid sudden changes in temperature where the lens is used, which may prevent operation

temporarily if condensation forms in the lens.

DEALING WITH ABNORMALITIES

WARNING

If any of the following situations occurs, immediately dismount the lens from the camera and contact Canon's

representative or the dealer listed below.

• Smoke, fumes, or unusual noises

• Entry of foreign objects (such as liquid or metal objects) inside the product

MAINTENANCE AND INSPECTION

NOTE

1. Clean off any dust on the lens surface using a lens blower or a soft lens brush. In case of getting fingerprints or

stains on the lens, use a clean cotton cloth moistened with commercial lens cleaning fluid, or use lens cleaning

paper. Gently wipe in a spiral pattern from the center of the lens. Be careful not to rub dust across the lens,

which may scratch the lens surface.

2. Routine inspection about once a year is recommended, depending on the conditions and environment of use.

Request overhaul, if needed.

CAUTION

Always attach the lens cap, hood cap, dust cap or covers before storage. Storing the lens without the caps or

covers attached poses a risk of fire if the lens concentrate light in direct sunlight.

NOTE

Immediately wipe off any moisture on the lens from misty or foggy environments, using a dry cloth. Seal the

lens in a plastic bag with a desiccant (preferably new) to prevent moisture inside. Otherwise it may cause the

mold or the malfunction of the product.

Pub No. BT1-B040-A

Zoom drive gear

Iris drive gear

111

0.8 metric module

88.8 mm

93.5 degrees

55 degrees

STORAGE

Specifications

Unit: mm

Lens Mount

Focal Length

Maximum T-stop

Iris Blades

Super 35mm

Coverage

Image Circle /

H x V (1.78:1)

Angular Field of View

(H / V) at wide angle end

Angular Field of View

(H / V) at telephoto end

EOS C300

Coverage

Image Circle /

H x V (1.78:1)

Angular Field of View

(H / V) at wide angle end

Angular Field of View

(H / V) at telephoto end

EOS C500

Coverage

Image Circle /

H x V (1.9:1)

Angular Field of View

(H / V) at wide angle end

Angular Field of View

(H / V) at telephoto end

Minimum Object Distance (M.O.D.)

Super 35mm

Object

Dimensions at

EOS C300

M.O.D.

EOS C500

Focus Angular Rotation

Zoom Angular Rotation

Spur Gear Module

Front Diameter

Length

Weight

* A variety of professional camera accessories compatible with the φ15 mm and φ19 mm rod system can be

used with this lens.

* This lens is compatible with EOS cameras that have a Super 35mm or equivalent sensor, or an APS-C image

sensor. The lens is not compatible with cameras that have a 35-mm full-size sensor or an APS-H sensor.

Reference Information

This lens is a full manual lens for shooting movies.

• This lens is developed primarily for movie production, and have a color balance typical for movies. This means that the

color reproduction is warmer than that of EF lenses which are basically used to shoot still images. Therefore, when using

both types of lens together, adjust the color balance (redo the white balance etc.) as necessary.

• In general, the depth of field becomes shallow and the focusing range becomes extremely narrow near the widest

aperture and when shooting a subject at close range. In addition, this tendency increases for lenses with longer focal

lengths. When shooting images, carefully check the focusing condition using the zoom mode of the finder or other means,

and shoot a sufficient number of test images before performing focus operations.

(for EF mount Lens only)

• The T-numbers of this lens are indicated on the iris ring of the lens. On the other hand, the iris information from this lens to

the camera uses the F-number in consideration of use together with conventional EF lenses. Therefore, the camera side

displays a different value (F-number) from the indication on the iris ring of the lens.

• Information of the focal length displayed on the camera side omits the figures below the decimal point.

1. Canon shall bear no responsibility for damage resulting from improper operation of this product by the customer.

2. Canon shall make no guarantees about the product quality, functions, or operation manual and its marketability

and suitability for the customer's purpose.

Moreover, Canon shall bear no responsibility for any damage, direct or incidental, that results from usage for the

customer's purpose.

3. Canon shall make no guarantees about the results obtained using this product.

4. The product specifications, configuration, and appearance are subject to change without prior notice.

5. For further information on repairs, maintenance, or adjustments not mentioned in this operation manual, contact

your Canon dealer or your Canon sales representative.

6. Note that Canon may be unable to undertake servicing or repair of a product if it is modified without consulting

Canon or your Canon sales representative.

For CN-E30-105mm T2.8 L S only

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This

device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

-- Consult the dealer or an experienced radio/TV technician for help.

Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If such

changes or modifications should be made, you could be required to stop operation of the equipment.

For CN-E30-105mm T2.8 L S only

Only for European Union and EEA (Norway, Iceland, and Liechtenstein)

This symbol indicates that this product is not to be disposed of with your household waste, according

to the WEEE Directive (2012/19/EU) and national legislation. This product should be handed over to a

designated collection point, e.g., on an authorized one-for-one basis when you buy a new similar product

or to an authorized collection site for recycling waste electrical and electronic equipment (EEE). Improper

handling of this type of waste could have a possible negative impact on the environment and human

health due to potentially hazardous substances that are generally associated with EEE. At the same time,

your cooperation in the correct disposal of this product will contribute to the effective usage of natural

resources. For more information about where you can drop off your waste equipment for recycling, please

contact your local city office, waste authority, approved WEEE scheme or your household waste disposal service.

For more information regarding return and recycling of WEEE products, please visit

www.canon-europe.com/weee.

CANON INC.

30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan

Canon Europe Ltd

3 The Square, Stockley Park, Uxbridge,Middlesex, UB11 1ET UK

CN-E30-105mm T2.8 L S

Canon EF

30 to 105 mm

T2.8 (f = 30 to 105)

11 pieces

φ27.5 mm /

24.0 x 13.5 mm

43.6 / 25.4 degrees

13.0 / 7.4 degrees

φ28.2 mm /

24.6 x 13.8 mm

44.6 / 25.9 degrees

13.4 / 7.5 degrees

φ29.6 mm /

26.2 x 13.8 mm

47.2 / 25.9 degrees

14.2 / 7.5 degrees

0.6 m / (from the image sensor)

32.3 x 18.2 cm at wide angle end

9.3 x 5.2 cm at telephoto end

33.1 x 18.6 cm at wide angle end

9.6 x 5.4 cm at telephoto end

35.3 x 18.6 cm at wide angle end

10.2 x 5.4 cm at telephoto end

300 degrees

93.5 degrees

0.8 metric module

φ114 mm

218 mm

2.2 kg

TO THE CUSTOMER

FCC REGULATIONS

Canadian Radio Interference Regulations

CAN ICES-3(B)/NMB-3(B)

may be reproduced or copied in any from or by any

means without the written permission of Canon Inc.

CN-E30-105mm T2.8 L SP

210 mm

4/6