Astroflex Astrostart RS-304 Benutzerhandbuch

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Fernstart Astroflex Astrostart RS-304 herunter. Astroflex Astrostart RS-304 4 Seiten.

Seite drucken

REMOTE CONTROLE ENGINE STARTER

WITH BUILT-IN

ALARM SYSTEM

MODEL RS-304

Designed for use in all automatic

transmission , gasoline or diesel

powered, fuel injected vehicles

(Carburetor or throttle-assisted

engines require an optional

solenoid kit). Do not install

in vehicles equipped with

a manual transmission

Made in Canada by:

ASTROFLEX Inc.

Patents Pending

U.S.

4.345.554

CDN

1.130.426

Thank you for choosing the ASTROSTART™Remote control

Engine Starter. Your ASTROSTART™ is the product of

extensive research by a company specializing in the design

of high quality electronic equipment for automotive vehicles.

ASTROSTART™ is designed to provide years of reliable,

trouble-free service. Its advanced microprocessor circuitry

incorporates billions of possible access codes to prevent

interaction with other remote controlled vehicles.

ASTROSTART's safe and convenient features will make your

life easier.

Please take time to read these instructions carefully. Some

features may not be installed or applicable to your vehicle.

Safety Precautions!

•

Always turn OFF the main switch when parking your

vehicle in a closed, non-ventilated garage or when the

vehicle is being serviced.

•

Always turn OFF the main switch when ASTROSTART™

is not being used for extended periods of time.

•

Keep the transmitter away from children's reach.

•

For proper ASTROSTART™ operation, regular engine

tune-ups are recommended.

•

Always turn OFF the wiper switch before leaving vehicle.

•

Test your hood pin switch regularly to ensure safe

operation. This switch stops the engine when hood is

open.

•

Check for any local legislation that would prohibit leaving

a running vehicle unattended on public streets.

•

Always advise service personnel that your vehicle is

equipped with ASTROSTART™.

•

A yearly check up of your Remote Starter is strongly

recommended. Contact the ASTROSTART™ dealer in

your area.

BEFORE YOU USE YOUR TROSTART™

•

Select the desired setting for the heater/AC system

(when ASTROSTART™ starts the vehicle the heating /

AC system will resume operation).

•

Make sure that the vehicle is in the PARK position.

USING THE MAIN SWITCH

The astrostart™ main switch should be mounted under the

dash. It includes an ON-OFF rocker switch and a small LED

indicator light. Turning OFF this switch prevents using remote

start functions. Optional features remain active. The LED

indicator flashes user information codes.

THE REMOTE TRANSMITTER

A small 12 Volt alkaline battery (GP23A) powers your remote.

Under normal use, it should last approximately 6 months.

Range may be affected by a weak battery or by location (ie.

crowded parking lot, metal structures, hydro poles, etc.).

Using microprocessor-controlled CODE LEARNING, up to 3

additional ASTROSTART™ transmitters can be added at any

time (for a total of 4). See your ASTROSTART™ dealer.

USING YOUR REMOTE CONTROL

1, 2 or 3 Button Transmitter

Press on the desired button for 2 second. While pressing, the

LED will flash and stay on for 1 second while your command

is being transmitted. Commands will not be transmitted when

the button is not pressed for long enough (LED does not stay

on).

Example: Start - Push and hold the "A" button until the LED

shuts off.

4 BUTTON TRANSMITTER

Your remote control has four buttons and four LED indicators.

Each LED represents a separate group of functions. To

select the desired group, press the "P" button as many times

as required to light up the LED corresponding to the group of

functions you wish to access.

¾First LED lights up (RED) selecting

Push "P" Once

the

first group of functions.

¾Second LED lights up (ORANGE)

Push "P" Twice

selecting the second group of

functions.

Push "P" Three times¾Third LED lights up (YELLOW)

selecting the third group of functions.

Push "P" Four times ¾Fourth LED lights up (GREEN)

selecting the fourth group of

Example:To transmit "Start " function, the reference card

instructs you to:

•

Push "P" once, RED LED flashes.

•

Push "A" once, engine will start.

To transmit "Stop", repeat the same commands.

UNDERSTANDING THE COMMANDS

To simplify reading, remote control commands are

abbreviated. All commands in this manual will be listed in the

following manner:eg.

Command

Procedure

•

1 A

Push "P" once (1), Push "A" once (1)

•

3 B,C

Push "P" three (3) times,

Push "B" once (1), then "C" once (1)

•

3 A & B

Push "P" three (3) times,

Push "A" & "B" simultaneously.

COMMAND ACKNOWLEDGEMENT

To confirm most transmitted commands, the

ASTROSTART™ system will flash the parking lights and / or

honk the horn.These confirmations are codded to provide

system status information to the user.

eg. Code

Description

(horn 1, parking 2)

Horn will honk once (1),

Parking lights will flash

twice (2).

THE REFERENCE CARD

A reference card is enclosed with the manual. This card lists

all available functions and the corresponding button

sequence to use. Keep this card on your person when using

your ASTROSTART™ system.