Astroflex AstroLock VSS-113 Benutzerhandbuch - Seite 18

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Autoalarm Astroflex AstroLock VSS-113 herunter. Astroflex AstroLock VSS-113 18 Seiten. Keyless entry security system

Seite drucken

REFERENCE GUIDE

T
(1)
O ARM AND LOCK
USING YOUR REMOTE
T
(1)
O DISARM AND UNLOCK
USING YOUR REMOTE
T
P
M
O ACTIVATE
ANIC
ODE
T
P
M
O EXIT
ANIC
ODE
AED D
ISABLING
T
S
M
™
O ACTIVATE
ILENT
ODE
A
RMING WHILE DRIVING
D
ISARMING WITHOUT
A TRANSMITTER
L
V
B
OCATION OF
ALET
UTTON
(1) The installation of these options may require additional optional parts and/or labour.
Cut along dotted line and fold for a quick and easy reference to keep in your purse or wallet.
The company behind this system is Astroflex Electronics, member of Directed Electronics, Inc.
Call (888) 892-7876 for more information about our products and services.
Astroflex Electronics is committed to delivering world class quality
© 2006 A
E
STROFLEX
LECTRONICS
You can lock the doors, and arm the system by pressing the
When the system arms, you will hear a short siren sound, or chirp, and the parking lights will flash once. If
the vehicle's power door locks have been connected to the system, the doors will lock (1).
To disarm the system and unlock the doors, press the
lights will flash twice. If power locks are connected to the system, the doors will unlock (1). If the siren chirps
either four or five times when disarming, see Diagnostics section. This is called Tamper Alert.
Turn ignition to RUN position
Valet button
Valet Mode, and it will go out if you are exiting Valet Mode.
confirmation chirp(s) will be eliminated for that one operation only.
Press
The system will chirp once and then once more to indicate that the ignition is on.
Turn on the ignition
number of times within 15 seconds. The system should now disarm. If it does not,
you may have waited too long. Turn the ignition off and on and try again.
The Valet button is located :
products and services that excite and delight our customers.
© 2006 Astroflex Electronics – All rights reserved
– A
LL RIGHTS RESERVED
Press and hold down
Press
or
, then turn to OFF position. Press and release the
within 10 seconds. The status LED will light solid if you are entering
Press
briefly before arming or disarming, and the
on your transmitter for 2.5 seconds while the vehicle is running.
. Press the Valet button
Note down the location of the Valet button inside the vehicle.
Sherbrooke, Qc (Canada) J1R 0L1
UEVSS113 1206
button on your transmitter for one second.
button. You will hear two chirps, and the parking
or
for five seconds.
for one second.
the programmed
Astroflex Electronics
www.astroflex.com
16