Dorel Juvenile Group Backless Pronto Gebrauchsanweisung - Seite 8

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Baby & Kleinkindmöbel Dorel Juvenile Group Backless Pronto herunter. Dorel Juvenile Group Backless Pronto 12 Seiten. Belt-positioning booster

Seite drucken

1. Belt-Positioning Booster Use

4358-4547 Backles Pronto US

5/21/08

Cup Holder

9:06 AM

Page 15

The cup holder is located

in the base of the child

restraint.

Pull out cup holder to use.

Push cup holder in when

not needed.

Knowing Your Vehicle Belts

This auto booster must only be used in vehicles with

appropriate vehicle belts that can be tightened securely.

the vehicle belt cannot be tightened securely, it

must be replaced. This booster MUST only be used

with a lap/shoulder belt.

Belt systems which will not

work with this child auto booster (or sometimes any child

restraint) include, but are not limited to, the following:

• Do not use with any automatic/passive vehicle seat

belt.An automatic (passive) 2-point belt has no lap belt.You

must install a lap belt to secure a child restraint.You may

also need to install an extra lap belt for an automatic

(passive) 3-point belt. Refer to the vehicle owner's manual.

• If your vehicle belt is too short,

dealer for a seat belt extender. Do not route the seat belt

any way except as shown in the instructions.

•You must move the auto booster to another

seating location if the belts come out of the center

of the door or side panel (A); or if the buckle is in

the middle of the vehicle seat cushion (so that they

are forward of the bight) (B).

contact your vehicle