DADO Door Master Controller Betriebshandbuch - Seite 7

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Controller DADO Door Master Controller herunter. DADO Door Master Controller 20 Seiten.

SYSTEM OVERVIEW and FEATURES

Electronics:

The system controller is a 110/220VAC powered master controller that contains the

main motherboard, motor driver board, power supply board, and optional audio

processing board. When ordering, if the system is to be operated from 220, this

controller may need to be specifically prepared in advance with special wiring

internally. Connections to the controller are as follows:

8 port RJ45 jack(uses CAT5E cable, straight through wiring):

Port 1: Touch Panel A

Port 2: Touch Panel B

Port 3: Optional Keypad

Port 4: Motor Logic Cable

Port 5: AUX IOs (4 buffered connections for external control input/output)

Port 6: MISC IO((2 connections for external control input/output)

Port 7: RS485 interface for remote device serial communication

Port 8: RS485 interface (duplicate for daisy chain)

Motor 3 Phase Power Leads:

Connection to the Brushless DC motor power using 26VDC is made with a 3

condutor 18G

specially prepared cable.

AC Power:

110VAC cord (Standard 3 conductor/3 prong power cord)

External Inputs:

AUX IO: The standard control system allows four external inputs of low voltage

sources(0 - 5VDC) for remote triggering. As an example, a Motion Sensor may be

used for automatic operation. A fire alarm may be used to trigger the door to open

or close as desired for egress requirements. Additional methods of signaling the door

to open or close may be configured. Consult with Dado Door Prior to making any

connections to external equipment. AUXIO board may only connect to the AUX

port.

MISC IO: Other inputs or outputs can be configured using the MISC IO port and MISC

IO breakout board plugged into the MISC IO port. MISC board can only connect to

the MISC port.