Cole Parmer AIR ADMIRAL 79202-30 Gebrauchsanweisung - Seite 11
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Water Pump Cole Parmer AIR ADMIRAL 79202-30 herunter. Cole Parmer AIR ADMIRAL 79202-30 20 Seiten. Vacuum/pressure pump (station)
Auch für Cole Parmer AIR ADMIRAL 79202-30: Benutzerhandbuch (10 seiten)
Seite drucken
Please Note: For Model 79202-05 and 79202-35, the
pumps are connected with a power cable with IEC plug for
for connection of the mains lead. The pumps are supplied
with two mains leads fitted. One lead has a U.K. 3 pin plug
and the other has a 2-pin "Shuko" plug for connection to
the mains. Choose the lead appropriate for your electrical
installation and discard the other. The U.K. mains lead is
protected by a 10A fuse mounted in the plug top.
2.52
Servicing of Double-Insulated Product
In a double-insulated product, two systems of insulation
are provided instead of grounding. No grounding means is
provided on a double-insulated product, nor should a
means for grounding to be added to the product. Servicing
of a double-insulated product requires extreme care and
knowledge of the system and should be done only by
qualified service personnel. Replacement parts for the
double-insulated product must be identical to those parts
in the product.
2.53
Overload Protection
This pump has a self resetting thermal protector. If the
motor should overheat, the protector will shut the unit off. If
this should occur, check the pump to ensure that
everything is normal. Unplug device and allow to cool for
10 minutes. Plug in and restart. If the overload trips again,
return the complete unit to your dealer for repair.
2.60 VACUUM CONNECTIONS
2.61
For best results, Cole-Parmer recommends the length of
the tubing between the pump and the chamber be kept as
small as possible.
11