Asus 90MB11H0-M0EAY0 Handbuch - Seite 10

Blättern Sie online oder laden Sie pdf Handbuch für Hauptplatine Asus 90MB11H0-M0EAY0 herunter. Asus 90MB11H0-M0EAY0 35 Seiten.

Seite drucken
Asus 90MB11H0-M0EAY0 Handbuch
1.2.1
Layout contents
Connectors/Jumpers/Slots/LED
ATX power connectors (24-pin EATXPWR, 8-pin EATX12V)
1.
CPU and chassis fan connectors (4-pin CPU_FAN, 4-pin CHA_FAN1~3)
2.
3.
Intel
LGA1151 CPU socket
®
4.
RGB headers (4-pin RGB_HEADER1, RGB_HEADER2)
5.
DDR4 DIMM slots
6.
USB 3.1 Gen 1 (up to 5Gbps) connectors (20-1 pin U31G1_12, U31G1_56)
7.
M.2 Socket 3
8.
Intel
B365 Serial ATA 6.0 Gb/s connector (7-pin SATA6G_1~6)
®
9.
Clear RTC RAM (2-pin CLRTC)
10. System panel connector (20-3 pin PANEL)
11. USB 2.0 connectors (10-1 pin USB1112, USB1314)
12. TPM connector (14-1 pin TPM)
13. Serial port connector (10-1 pin COM)
14. Mono out header (2-pin MONO_OUT)
15. Front panel audio connector (10-1 pin AAFP)
16. Digital audio connector (4-1 pin SPDIF_OUT)
17. PCI Express 3.0/2.0 x1 slots
18. PCI Express 3.0/2.0 x16 slots
ATX power connectors (24-pin
EATXPWR, 8-pin EATX12V)
Correctly orient the ATX power supply
plugs into these connectors and
push down firmly until the connectors
completely fit.
•
•
•
Chapter 1: Product introduction
For a fully configured system, we recommend that you use a power supply unit
(PSU) that complies with ATX 12 V Specification 2.0 (or later version) and provides
a minimum power of 350 W. This PSU type has 24-pin and 8-pin power plugs.
DO NOT forget to connect the 8-pin EATX +12V power plug. Otherwise, the system
will not boot up.
We recommend that you use a PSU with higher power output when configuring a
system with more power-consuming devices or when you intend to install additional
devices. The system may become unstable or may not boot up if the power is
inadequate.
EATX12V
EATXPWR
+3 Volts
+12 Volts
+12 Volts
+5V Standby
Power OK
GND
PIN 1
+5 Volts
GND
+5 Volts
GND
+3 Volts
+3 Volts
PIN 1
Page
1-2
1-3
1-3
1-3
1-4
1-4
1-4
1-5
1-5
1-5
1-6
1-6
1-6
1-6
1-7
1-7
1-7
1-7
GND
+5 Volts
+5 Volts
+5 Volts
-5 Volts
GND
GND
GND
PSON#
GND
-12 Volts
+3 Volts
1-2