Cole Parmer CN-200-2300 Gebrauchsanweisung - Seite 10

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Controller Cole Parmer CN-200-2300 herunter. Cole Parmer CN-200-2300 20 Seiten. Analogue controllers

Seite drucken
Cole Parmer CN-200-2300 Gebrauchsanweisung
7.

EQUIPMENT OPERATION

7. PRODUCT OPERATION.
7.1. The illustrations below show a detailed layout of the CN-200-2300 & CN-200-1100-115
control unit.
7.1. The illustrations below show detailed layout of the MC227 & MC228X1 control unit.
7. PRODUCT OPERATION.
7.1. The illustrations below show detailed layout of the MC227 & MC228X1 control unit.
Check the Dataplate label and ensure your mains electrical supply voltage is
compatible with this product.
7.2. Connect the IEC output plug from the controller to your heating apparatus product as
Check the Dataplate label and ensure your mains electrical supply voltage is
illustrated.
Check the Dataplate label and ensure your mains electrical supply voltage is
compatible with this product.
compatible with this product.
7.2. Connect the IEC output plug from the controller to your heating apparatus product as
7.2. Connect the IEC output plug from the controller to your heating apparatus product as
illustrated.
illustrated.
Page 10 of 20
Page 10 of 20
230V illustration
1
Mains Input socket.
1
Mains Input socket.
2
Earth continuity test point
2
Earth continuity test point
3
Controlled appliance heaters on neon lamp.
230V illustration
3
Controlled appliance heaters on neon lamp. (Amber).
4
Regulator control knob.
1
Mains Input socket.
5
Mains output – connection to appliance
4
2
Regulator control knob.
Earth continuity test point
6
Refer to instructions book.
3
Controlled appliance heaters on neon lamp.
5
Mains output – connection to appliance
7
Fuse holder
4
Regulator control knob.
(See section 8 & 11 for further information).
6
Refer to instruction manual.
8
Rod support clamp.
5
Mains output – connection to appliance
7
Fuse holder
9
Support clip.
6
Refer to instructions book.
(See section 8 & 11 for further information).
10
Dataplate label.
7
Fuse holder
(See section 8 & 11 for further information).
8
Rod support clamp.
8
Rod support clamp.
9
Support clip.
9
Support clip.
10
Dataplate label.
10
Dataplate label. (See for correct voltage type).
10
(See for correct voltage type).
(See for correct voltage type).
(Amber).
(Amber).
M7759 Issue 3.4
M7759 Issue 3.4