Cole Parmer EW-36223-04 Gebrauchsanweisung - Seite 11
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Controller Cole Parmer EW-36223-04 herunter. Cole Parmer EW-36223-04 20 Seiten. Heating controller
Seite drucken
7.3.
Connect to the mains electricity supply. Observe the white neon lamp is illuminated
showing the presence of mains electricity.
7.3. Connect the other end to your MC controller.
7.4. Connect to the mains electricity supply. Observe the white neon lamp is illuminated showing
7.4.
Switch the controller on by turning the regulator control knob clockwise to increase
the presence of mains electricity.
power. The amber neon lamp on the controller will pulsate to show that power is
being supplied to the mantel, heating tape or cord etc. The frequency of the pulse will
7.5. Switch the controller on by turning the regulator control knob clockwise to increase power.
increase as the regulator control knob setting is increased. At maximum setting the
The amber neon lamp on the controller will pulsate to show that power is being supplied to
the mantel, heating tape or cord etc. The frequency of the pulse will increase as the regulator
amber neon will be continually illuminated.
control knob setting is increased. At maximum setting the amber neon will be continually
illuminated.
7.5.
When your process is complete, switch off the controller and disconnect it from the
mains electricity supply.
7.6. When your process is complete, switch off the controller and disconnect it from the mains
electricity supply.
Always take suitable handling precautions when moving / touching hot
glass vessels and solutions.
Always take suitable handling precautions when moving / touching hot glass
vessels and solutions.
7.6.
Always refer to the Instruction manual of the equipment to be used.
7.7.
For safe operating practice always refer to the Instruction book of the equipment
being used.
Page 11 of 24
11
M7159 iss 4.4