Daemyung WEBGATE TDM08-SDI-TX Handbuch - Seite 8

Blättern Sie online oder laden Sie pdf Handbuch für Multiplexer Daemyung WEBGATE TDM08-SDI-TX herunter. Daemyung WEBGATE TDM08-SDI-TX 8 Seiten. Hs video multiplexer

Seite drucken

CAUTION

Connections

1. To control camera, all camera's (which are connected to TDM08-SDI-TX) ID (CAM ID or

RS485 ID) must not be overlapped.

2. EX-SDI 1.0 is not supported. (support HD-SDI and EX-SDI 2.0)

3. Please refer the DVR's manual for DVR's TDM configuration and usage.

4. Transmission distance of COAX (MUX OUT) is the same with HD-SDI's transmission distance.

(max. 180m)

5. TDM08-SDI-TX is not compatible with MUX08-SDI-RX.

Optic Cable

1. Do not bend the connector portion less than 30mm (minimum acceptable

refraction range).

2. Do not pull the cables from both sides.

3. Do not spin the device while the cable is connected.

4. Do not tie the cables.

COAX Cable

Please use COAX cable and BNC connector having impedance 75 Ω.

The max transmission distance of HD-SDI/EX-SDI 2.0 depends on the cable specification and

installation environments.

Cable Type

5C-HFB(T)

* Transmission distance can be varied depending on the decay rate of 750MHz. (dB/100m <

25dB attenuation is recommended.)

* Formed or high formed insulator cable is recommended.

* Double or triple shield cable is recommended.

Between

Camera↔TDM08

TDM08↔DVR

Video Format

PoC Camera: 180m

HD-SDI

NonPoC Camera: 180m

PoC Camera: > 180m

(different according to power

EX-SDI 2.0

consumption of camera)

NonPoC Camera: 700m

180m

EX-SDI TDM

Transmission Distance