Asus AT3GC-I NA SI Benutzerhandbuch - Seite 22

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Hauptplatine Asus AT3GC-I NA SI herunter. Asus AT3GC-I NA SI 38 Seiten. Motherboard - mini itx

Seite drucken

Front panel audio connector (10-1 pin AAFP)

This connector is for a chassis-mounted front panel audio I/O module that supports

either High Definition Audio or AC`97 audio standard. Connect one end of the front

panel audio I/O module cable to this connector.

AT3GC-I Analog front panel connector

If you want to connect a high-definition front panel audio module to this connector, ensure

that the Front Panel Support Type item in the BIOS is set to [HD Audio]. If you want to

connect an AC97 front panel audio module to this connector, set the item to [AC97]. See

section 2.4.5 Onboard Devices Configuration for details.

10.

Chassis intrusion connector (4-1 pin CHASSIS)

This connector is for a chassis-mounted intrusion detection sensor or switch. The

chassis intrusion sensor or switch sends a high-level signal to this connector when a

chassis component is removed or replaced. The signal is then generated as a chassis

intrusion event.

By default , the pin labeled "Chassis Signal" and " Ground" are shorted with a jumper

cap. Remove the jumper caps only when you intend to use the chassis intrusion

detection feature.

AT3GC-I 240-pin Chassis intrusion connector

1-13

AAFP

PIN 1

HD-audio-compliant

pin definition

CHASSIS

GND

Chassis Signal

+5VSB_MB

PIN 1

Legacy AC'97

compliant definition

Chapter 1: Product introduction