Canon S 530D Service-Handbuch - Seite 23

Blättern Sie online oder laden Sie pdf Service-Handbuch für Software Canon S 530D herunter. Canon S 530D 45 Seiten. Canon bjc-s530d: setup instruction
Auch für Canon S 530D: Broschüre & Specs (2 seiten), Hier beginnen (2 seiten)

Seite drucken

6.9.7. Digital camera direct mode

The camera mark appears in the LCD when the digital camera is connected. (Even with the memory card

inserted, all displays other than the camera mark disappear.)

When a supported digital camera is connected with the digital camera connection cable, the printer enters

this mode by priority. (However, if Memory Card Direct Printing is being performed, the printer will not

enter this mode until printing has completed. In the maintenance mode, the printer does not enter the

digital camera direct mode until the printer exits the maintenance mode via the maintenance button.)

In the digital camera direct mode, the printer will not enter other print modes until the digital camera is

disconnected from the printer, even if the Mode button is pressed.

When the maintenance button is pressed, the printer will enter the maintenance mode if printing is not being

performed.

If an error occurs, the error is displayed in the Required Sheets line of the LCD.

In the digital camera direct mode, when print start is designated from the digital camera, Digital Camera

Direct Printing starts.

Possible key operation under the mode:

Power button:

Resume button:

Maintenance button:

Other buttons:

6.9.8. Maintenance mode

The maintenance icon appears in the Required Sheets line of the LCD when the maintenance mode is

selected to maintain the S530D and optional CV-100.

This mode is selected by pressing the maintenance button, except during Memory Card Direct Printing and

Digital Camera Direct Printing.

Possible key operation under the mode:

Power button:

Resume button:

Mode button:

Print button:

Resume/Cancel button: Resets the maintenance items to default.

Maintenance button:

Powers off the printer.

Resets the printer (same as with the S520).

Enters maintenance mode unless Digital Camera Direct Printing is being

performed.

Invalid

Powers off the printer.

Resets the printer (same as with the S520).

invalid.

Specifies and implements the maintenance selection items.

Exits the maintenance mode.