bolid RIP-24-3/7М4 Gebrauchsanweisung - Seite 2

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Stromversorgung bolid RIP-24-3/7М4 herunter. bolid RIP-24-3/7М4 8 Seiten. Battery backed power supply

Seite drucken
1.2.10 The backup operating time of the RIP in case of charged batteries at load current
1 A is 5 hours minimum (if the load current decreases, the operating time increases
proportionally).
1.2.11 Overall dimensions: 340 mm × 270 mm × 100 mm max.
1.2.12 Weight with batteries: 8 kg max.
1.2.13 The RIP provides protecting its output against short circuit failures with
recovering output voltage automatically after repairing the failures while being powered by
mains and by batteries.
1.2.14 The RIP-24 provides output of information to the NPN output in case of
switching to powering by the backup batteries (in state of no mains power) or a short failure
in the load circuit. The NPN output is opened when AC line fails and the RIP is operating in
battery mode or in case of a short load circuit failure, and it is closed when the RIP is
powered by mains power. The maximum NPN output permissible voltage and switching
current are 30 V and 100 mA respectively.
1.2.15 The RIP provides connecting two extra 12 V batteries of 17 Ah each placed in a
special Box-24 Mod.0 to increase the time of operation from the batteries (with total capacity
of all RIP batteries being equal to 2×24 Ah).
1.2.16 The RIP provides immunity to electromagnetic interference of the third severity
level according to Russian Standard GOST R 50009-2000.
1.2.17 Radio disturbances from the RIP operation do not exceed the values specified in
GOST R 50009-2000.
1.2.18 The average lifetime of the RIP is at least 10 years provided that batteries are
replaced at least once per 5 years.
1.2.19 The pre-operation time of the RIP after powering up is 10 s maximum.
1.2.20 The RIP is designed to provide its fire safety while emergency operating and on
violations of operation rules as per GOST 12.1.004-91.
1.2.21 The ingress protection rating of the RIP is IP30 as per GOST 14254-96.
1.2.22 According to the content of precious materials the product does not require
accounting for storage, writing-off, and/or disposal.
1.3 Standard Delivery
1) Battery Backed Power Supply RIP-24 mod.01
2) Instruction Manual
3) Fuse 2 A
4) Woodscrew
5) Wall Plug 8х40
6) Grommet
7) Wire
8) Key
9) Packaging
2
– 1 pc.
– 1 copy
– 1 pc.
– 3 pcs.
– 3 pcs.
– 2 pcs.
– 1 pc.
– 2 pcs.
– 1 pc.