Canon 7215 - LV XGA LCD Projector Spezifikation - Seite 6
Blättern Sie online oder laden Sie pdf Spezifikation für Projektor Canon 7215 - LV XGA LCD Projector herunter. Canon 7215 - LV XGA LCD Projector 22 Seiten. Mounting hanger for low ceilings
Auch für Canon 7215 - LV XGA LCD Projector: Spezifikation (47 seiten), (Japanisch) Montage- und Installationshandbuch (8 seiten)
![Canon 7215 - LV XGA LCD Projector Spezifikation](/uploads/products/server2/1191057/1191057.png)
Basic Serial Functional Specification for LV-5210/7215/7210
3
Notes for Communication
3.1 The projector command is defined one command/one line that starts "C" and ends carriage
return (0x0D).
3.2 There are two types of command, functional execution commands and state read commands.
Example of Functional Execution Command: "C05" [CR]
Example of State Read Command: "CR0" [CR]
When it takes more than one second to receive on command, it clears information of buffer.
(until the projector receives the carriage return since the projector has received the first
data.)
3.3 When control command pipelining, after the response, wait interval of time, 100ms, as
below.
PC → Projector
Projector → PC
3.3.1
When a computer sends next command before receiving a return command, the
projector may not operate properly.
3.3.2
When there is no response after 5 seconds, issue next command.
3.4 It takes about 5 seconds for internal initialization after plugging in AC. During this time,
it cannot process command. Do not issue any commands.
3.5
Response for Status Read Command after accepting has different characters.
Status Read Command.
3.6 Characters for commands must be Capital (A - Z).
Command
"C""0""7"C
R
( a few ms- 5s)
More than 100ms
Next command
CR
ACK
Response
Page
See 7.
6