Canon LV-5220 - Multimedia Projector SVGA Funktionale Spezifikation - Seite 5
Blättern Sie online oder laden Sie pdf Funktionale Spezifikation für Projektor Canon LV-5220 - Multimedia Projector SVGA herunter. Canon LV-5220 - Multimedia Projector SVGA 20 Seiten. Multimedia projectors
Auch für Canon LV-5220 - Multimedia Projector SVGA: Funktionale Spezifikation (42 seiten), Spezifikationen (6 seiten)
Seite drucken
Basic Serial Command Functional Specification
3. Notes for Communication
3.1. The Projector command is defined one command/one line that starts "C" and ends carriage return
(0x0D).
3.2. There are two types of command, functional execution commands and state read commands.
Example of Functional Execution Command
"C05" [CR]
Example of State Read Command
"CR0" [CR]
3.3. When it takes more than one second to receive on command, it clears information of buffer.
(Until the Projector receives the carriage return since the Projector has received the first data)
3.4. When a computer keeps sending some command; it must wait sending next command after 100ms
when the computer receives the return command.
PC → Projector
Projector → PC
3.4.1. When a computer sends next command before receiving a return command, the Projector may
not operate properly.
3.4.2. When there is no response after 5 seconds, issue next command.
3.5. It takes about 5 seconds for internal initialization after plugging in AC.
During this time, it cannot process command. Do not issue any commands.
3.6. Response for status read command after accepting has different characters.
See 7. Status Read Command.
3.7. Characters for commands must be capital (A - Z).
Command
"C"
"0"
"7"
CR
(A few ms- 5s)
More than 100ms
Next Command
ACK CR
Response
Page 4 of 19