Canon LV-7565 Spezifikation - Seite 17

Blättern Sie online oder laden Sie pdf Spezifikation für Projektor Canon LV-7565 herunter. Canon LV-7565 47 Seiten. Multimedia projectors
Auch für Canon LV-7565: Broschüre & Specs (6 seiten), Broschüre (6 seiten), Spezifikationen (6 seiten)

Seite drucken
Canon LV-7565 Spezifikation
Expand Serial Command Specification

8.4.7. CF_WBAL- Command

Command
"CF_WBAL-%1_%2" [CR]
"R" --------------- Red
%1
"G" --------------- Green
"B" --------------- Blue
"000 ~ 063" ----- Directly select color value by White Balance %1 determination
%2
"UP" ------------ Color value for White Balance %1 determination +1
"DN" ------------ Color value for White Balance %1 determination -1
Set the user control color value by white balance %1 determination.
The value set by their Command will not be saved to the Projector.
Details
Therefore, when All Off the Projector, the value will return to the original
setting. (For Stand-by mode, this value stays.)
Only valid when it is in the usual Power On state.
Acceptable
Response
Unacceptable

8.4.8. CF_COLTEMP Command

Command
"CF_COLTEMP_%1" [CR]
%1
"000 ~ 003"
Set the Color Temp.
The value set by their Command will not be saved to the Projector.
Details
Therefore, when All Off the Projector, the value will return to the original
setting. (For Stand-by mode, this value stays.)
Only valid when it is in the usual Power On state.
Acceptable
Response
Unacceptable

8.4.9. CF_NZRED Command

Command
"CF_NZRED_%1" [CR]
"ON" ------------- Select Noise Reduction
%1
"OFF" ------------ Cancel Noise Reduction
Set / Cancel Noise Reduction.
The value set by their Command will not be saved to the Projector.
Details
Therefore, when All Off the Projector, the value will return to the original
setting. (For Stand-by mode, this value stays.)
Only valid when it is in the usual Power On state.
Acceptable
Response
Unacceptable

8.4.10. CF_PROGV Command

Command
"CF_PROGV_%1" [CR]
"L1" ------------ Select Progressive Mode L1
%1
"L2" ------------ Select Progressive Mode L2
"OFF" ---------- Cancel Progressive Mode
Set / Cancel Progressive Mode.
The value set by their Command will not be saved to the Projector.
Details
Therefore, when All Off the Projector, the value will return to the original
setting. (For Stand-by mode, this value stays.)
Only valid when it is in the usual Power On state.
Acceptable
Response
Unacceptable
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
Page 16 of 46