Canon LV-S2 Benutzerhandbuch - Seite 25

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Projektor Canon LV-S2 herunter. Canon LV-S2 44 Seiten. Micro-portable multimedia projector
Auch für Canon LV-S2: Broschüre & Specs (2 seiten)

Seite drucken

This projector can automatically tune to the display signals of most personal computers. However, some computers employ

special signal formats which are different from the standard ones and may not be tuned by the Multi-Scan system of this

projector. If this happens, projector cannot reproduce a proper image and the image may be displayed as a flickering

picture, a non-synchronized picture, a non-centered picture or a skewed picture.

This projector has Manual PC Adjustment to enable you to precisely adjust several parameters to match those special signal

formats. This projector has 5 independent memory areas to memorize those parameters manually adjusted. This enables

you to recall the setting for a specific computer whenever you use it.

Note : This PC ADJUST Menu cannot be operated when "RGB" is selected on PC SYSTEM Menu (P22).

Press the MENU button and the ON-SCREEN MENU will

appear. Press the POINT LEFT/RIGHT button to move the red

frame to PC ADJUST Menu icon.

Press the POINT DOWN button to move the red frame to the

item that you want to adjust and then press the SET button. The

Adjustment dialog box will appear.

LEFT/RIGHT button to adjust value.

Fine sync

Adjusts an image as necessary to eliminate flicker from the display.

Press the POINT LEFT/RIGHT button to adjust value.(From 0 to 31.)

Total dots

The number of total horizontal dots in your picture. Press the POINT

LEFT/RIGHT button(s) and adjust number to match your PC image.

Horizontal

Adjusts the horizontal picture position.

LEFT/RIGHT button(s) to adjust the position.

Vertical

Adjusts the vertical picture position. Press the POINT LEFT/RIGHT

button(s) to adjust the position.

Current mode

Press the SET button to show the information of the computer

selected.

Clamp

Adjusts the clamp level. When the image has a dark bar(s), try this

adjustment.

MANUAL PC ADJUSTMENT

Press the POINT

COMPUTER INPUT

PC ADJUST MENU

Move the red frame to the item and press

the SET button.

Selected Mode

Press the POINT LEFT/RIGHT

button to adjust the value.

Press the SET button at this icon

to adjust "Clamp," "Display area

(H/V)" or set "Full screen."

Current mode

Press the SET button at the

Current mode icon to show

the information of the

computer connected.

PC ADJUST Menu icon

Shows status

(Stored / Free) of the

selected Mode.