Akyga AK-BC-01 Benutzerhandbuch - Seite 3
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Batterieladegerät Akyga AK-BC-01 herunter. Akyga AK-BC-01 4 Seiten. Microprocessor battery charger
Seite drucken
AK-BC-01 - user manual
Short-circuiting the current connection is prohibited.
ź
In case of any doubts regarding operation, safety or connection of the product, please contact
ź
the manufacturer or a qualified specialist for this purpose.
All maintenance, adjustment and repair work on the product may only be carried out by a
ź
qualified person in a specialist facility.
Removing the most common problems
Problem
A cell connected to an
electrical outlet via
charger does not charge
Preparing the Battery Charger for Use:
1.
Connect the charger via added power cord to the electrical outlet.
2.
Place the cells in the battery charger. Make sure that the cells are correct placed in the
charger.
3.
The progress of the charging process is displayed on the LCD display.
4.
The full battery symbol signals that the battery has been charged.
5.
After charging the cells, disconnect the charger from the mains socket, then remove the
cells.
Cleaning the power supply
Disconect the power supply from the electrical socket and connected devices before cleaning.
Use soft and antistatic cloth for cleaning the battery charger.
ź
Do not use abrasive or chemical cleaners.
ź
Cause
No mains voltage
The battery charger is
overloaded
Incorrect placement of
the cell in the charger
There is a suspicion of a
product defect
Solution
Check the correct connection of
ź
the charger to the mains socket
Check the mains fuses
ź
Disconnect the charger from the
ź
power network, heck the
correctness of the current
parameters
Place the cell according to the
ź
polarity marked on the charger
Stop using and contact the
ź
seller
p. 3