Bolink R/C LEGENDS Montageanleitung Handbuch - Seite 2

Blättern Sie online oder laden Sie pdf Montageanleitung Handbuch für Spielzeug Bolink R/C LEGENDS herunter. Bolink R/C LEGENDS 6 Seiten. Chassis kit

STEP 2 OPEN BAG 1L2 AND PRESS ONE STUB AXLE INTO

EACH STEERING BLOCK AND RETAIN WITH AN E-CLIP.

STEP 4 OPEN BAG 9L AND INSTALL A 2" BODY POST ON

EACH SIDE OF THE FRONT AXLE PLATE WITH A 3/8" LONG

SOCKET HEAD SCREW. INSTALL A 1" BODY POST ON EACH

SIDE OF THE CHASSIS AGAIN USING A 3/8" SOCKET HEAD

SCREW. ADD A BODY POST NUT TO EACH OF THE FOUR

POSTS. SET ASIDE THE CLIPS AND REMAINING NUTS. THEY

WILL BE USED LATER WHEN MOUNTING THE BODY.

STEP 1 THE CHASSIS COMES PARTIALLY ASSEMBLED.

STEP 1

PLACE IT ON A TABLE TO SEE IF IT SITS FLAT. IF NOT, HOLD

IT BY BOTH ENDS AND GENTLY TWIST IN THE PROPER

DIRECTION TO STRAIGHTEN. RECHECK AND REPEAT AS

NEEDED.

STEP 3 LUBE EACH KINGPIN WITH A LIGHT OIL. INSTALL A

STEP 3

STEERING BLOCK, SPRING, WASHER, AND E-CLIP ON EACH.

SET ASIDE THE TWO REMAINING LOCKNUTS AND FRONT

BUSHINGS. THEY WILL BE USED LATER DURING THE FRONT

WHEEL ASSEMBLY.

STEP 5 OPEN BAG 1L3 AND INSTALL THE BUMPER TO THE

STEP 5

FRONT AXLE PLATE FROM THE BOTTOM OF THE CHASSIS

WITH TWO 1/4" LONG SOCKET HEAD SCREWS. THE SCREWS

WILL SELF TAP INTO THE AXLE PLATE.

STEP 2

STEP 4